SKILHUNT

Posted in Accessories, Skilhunt, Sports, Stores

MT-M1 Mount – Offset 20 mm rail mount, suits flashlights with 1...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

MT-P1 Mount – Come with rubber pad Weight: 98g ( included rubber...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

MT-P2 Mount – MT-P2 Mount

Buy At Vendors Site

M2 Charger – Input voltage: AC 100-240V 50/60Hz   DC 12V Output voltage: 4.2V±1% / 1.48V±1% Output current: 500mA x 2 Weight: 104g (without battery and cable) Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340(RCR123A), 14500 Ni-MH / Ni-CD: AA, AAA, C Dimensions: 133mm x 70mm x 35mm Features: 1. Greater compatibility, compatible with Li-ion, Ni-MH and Ni-Cd. 2. Automatically detects battery status and selects the appropriate voltage and charge mode. 3. Two battery slots completely independent control. 4. Dynamic battery capacity display, free control the charging process at any time. 5. Reverse polarity protection, to protect from improper battery installation. 6. Features three charging modes. ( CC, CV and Trickle Charge) 7. Stainless steel slide-way provide smooth sliding. M2 Charger – Input voltage: AC 100-240V 50/60Hz   DC 12V Output voltage: 4.2V±1% / 1.48V±1% Output current: 500mA x 2 Weight: 104g (without battery and cable) Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340(RCR123A), 14500 Ni-MH / Ni-CD: AA, AAA, C Dimensions: 133mm x 70mm x 35mm Features: 1. Greater compatibility, compatible with Li-ion, Ni-MH and Ni-Cd. 2. Automatically detects battery status and selects the appropriate voltage and charge mode. 3. Two battery slots completely independent control. 4. Dynamic battery capacity display, free control the charging process at any time. 5. Reverse polarity protection, to protect from improper battery installation. 6. Features three charging modes. ( CC, CV and Trickle Charge) 7. Stainless steel slide-way provide smooth sliding. M2 Charger – Input voltage: AC 100-240V 50/60Hz   DC 12V Output voltage: 4.2V±1% / 1.48V±1% Output current: 500mA x 2 Weight: 104g (without battery and cable) Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340(RCR123A), 14500 Ni-MH / Ni-CD: AA, AAA, C Dimensions: 133mm x 70mm x 35mm Features: 1. Greater compatibility, compatible with Li-ion, Ni-MH and Ni-Cd. 2. Automatically detects battery status and selects the appropriate voltage and charge mode. 3. Two battery slots completely independent control. 4. Dynamic battery capacity display, free control the charging process at any time. 5. Reverse polarity protection, to protect from improper battery installation. 6. Features three charging modes. ( CC, CV and Trickle Charge) 7. Stainless steel slide-way provide smooth sliding. M2 Charger – Input voltage: AC 100-240V 50/60Hz   DC 12V Output voltage: 4.2V±1% / 1.48V±1% Output current: 500mA x 2 Weight: 104g (without battery and cable) Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340(RCR123A), 14500 Ni-MH / Ni-CD: AA, AAA, C Dimensions: 133mm x 70mm x 35mm Features: 1. Greater compatibility, compatible with Li-ion, Ni-MH and Ni-Cd. 2. Automatically detects battery status and selects the appropriate voltage and charge mode. 3. Two battery slots completely independent control. 4. Dynamic battery capacity display, free control the charging process at any time. 5. Reverse polarity protection, to protect from improper battery installation. 6. Features three charging modes. ( CC, CV and Trickle Charge) 7. Stainless steel slide-way provide smooth sliding.
Posted in Chargers, Skilhunt, Sports, Stores

M2 Charger – Input voltage: AC 100-240V 50/60Hz   DC 12V Output...

Buy At Vendors Site

M4D LCD intelligent charger – M4D LCD Digicharger Features: High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries. Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time. One button easy control all charging status. Four battery channels independent control. Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries. Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA ) LCD display to you each of batteries charging status include charging current, charging capacity, charging time, charging voltage. Free control the charging process at any time. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Introduction: The M4D digicharger is an universal, intelligent LCD charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time. The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button. Operations: The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button  5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode. The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge. Press the MODE button, switch to display battery charging time or charging capacity. In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply. Specifications: Input voltage: DC 12V/2A Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4 Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C Caution: For this charger may only be used with rechargeable battery types listed  above.   Do not attempt to charge other battery types, this is dangerous and may cause personal injury! Do not mix charge LiFePO4 battery with other battery types! Suggetion: Charge the Ni-MH/Ni-CD battery or low capacity (1000mAh or less)  battery, we recommend use charging current 500mA or less. USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at IMR or Li-ion batteries. Weight:  203g (without battery and adapter) Size: 160mm*93mm*36mm Storage temperature: -20℃~ 60℃ M4D LCD intelligent charger – M4D LCD Digicharger Features: High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries. Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time. One button easy control all charging status. Four battery channels independent control. Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries. Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA ) LCD display to you each of batteries charging status include charging current, charging capacity, charging time, charging voltage. Free control the charging process at any time. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Introduction: The M4D digicharger is an universal, intelligent LCD charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time. The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button. Operations: The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button  5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode. The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge. Press the MODE button, switch to display battery charging time or charging capacity. In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply. Specifications: Input voltage: DC 12V/2A Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4 Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C Caution: For this charger may only be used with rechargeable battery types listed  above.   Do not attempt to charge other battery types, this is dangerous and may cause personal injury! Do not mix charge LiFePO4 battery with other battery types! Suggetion: Charge the Ni-MH/Ni-CD battery or low capacity (1000mAh or less)  battery, we recommend use charging current 500mA or less. USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at IMR or Li-ion batteries. Weight:  203g (without battery and adapter) Size: 160mm*93mm*36mm Storage temperature: -20℃~ 60℃ M4D LCD intelligent charger – M4D LCD Digicharger Features: High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries. Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time. One button easy control all charging status. Four battery channels independent control. Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries. Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA ) LCD display to you each of batteries charging status include charging current, charging capacity, charging time, charging voltage. Free control the charging process at any time. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Introduction: The M4D digicharger is an universal, intelligent LCD charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time. The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button. Operations: The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button  5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode. The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge. Press the MODE button, switch to display battery charging time or charging capacity. In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply. Specifications: Input voltage: DC 12V/2A Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4 Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C Caution: For this charger may only be used with rechargeable battery types listed  above.   Do not attempt to charge other battery types, this is dangerous and may cause personal injury! Do not mix charge LiFePO4 battery with other battery types! Suggetion: Charge the Ni-MH/Ni-CD battery or low capacity (1000mAh or less)  battery, we recommend use charging current 500mA or less. USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at IMR or Li-ion batteries. Weight:  203g (without battery and adapter) Size: 160mm*93mm*36mm Storage temperature: -20℃~ 60℃ M4D LCD intelligent charger – M4D LCD Digicharger Features: High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries. Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time. One button easy control all charging status. Four battery channels independent control. Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries. Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA ) LCD display to you each of batteries charging status include charging current, charging capacity, charging time, charging voltage. Free control the charging process at any time. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Introduction: The M4D digicharger is an universal, intelligent LCD charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time. The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button. Operations: The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button  5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode. The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge. Press the MODE button, switch to display battery charging time or charging capacity. In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply. Specifications: Input voltage: DC 12V/2A Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4 Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C Caution: For this charger may only be used with rechargeable battery types listed  above.   Do not attempt to charge other battery types, this is dangerous and may cause personal injury! Do not mix charge LiFePO4 battery with other battery types! Suggetion: Charge the Ni-MH/Ni-CD battery or low capacity (1000mAh or less)  battery, we recommend use charging current 500mA or less. USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at IMR or Li-ion batteries. Weight:  203g (without battery and adapter) Size: 160mm*93mm*36mm Storage temperature: -20℃~ 60℃
Posted in Chargers, Skilhunt, Sports, Stores

M4D LCD intelligent charger – M4D LCD Digicharger Features: High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries. Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time....

Buy At Vendors Site

M1 intelligent USB charger – Specifications Input voltage: DC 5V Output voltage: 4.35V±0.05V / 4.2V±0.05V / 1.45V±0.05V /3.65±0.05V Output current: 1*500 mA / 1*1000 mA Li-ion/IMR/LiFePO4:26650,22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at Li-ion batteries. Weight:  46g (without USB cable) Size: 113mm*29.5mm*38mm Storage temperature: -20℃~ 60℃ Operations Button: power connetion, hold press button 2 seconds to switch charging current as 500mA or 1000mA. Insert the battery, press button to change charging modes. LED indicator: power connetion, all of indicators light, if no battery in the slot, 500mAh indicator constant on, others off. Insert the battery, 4 charging process LED indicators flash, press button to choose battery charging mode, without any sellection, charger will automatically identify battery. Features High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH/Ni-Cd batteries. Max 1000mA charging current, fast charge to save your time. One button easy control all charging status. Soft-start function, to avoid damage from large current charge and safely  charge small capacity batteries. LED indicator display battery charging process. Two charging current options. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Caution: For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury! M1 intelligent USB charger – Specifications Input voltage: DC 5V Output voltage: 4.35V±0.05V / 4.2V±0.05V / 1.45V±0.05V /3.65±0.05V Output current: 1*500 mA / 1*1000 mA Li-ion/IMR/LiFePO4:26650,22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at Li-ion batteries. Weight:  46g (without USB cable) Size: 113mm*29.5mm*38mm Storage temperature: -20℃~ 60℃ Operations Button: power connetion, hold press button 2 seconds to switch charging current as 500mA or 1000mA. Insert the battery, press button to change charging modes. LED indicator: power connetion, all of indicators light, if no battery in the slot, 500mAh indicator constant on, others off. Insert the battery, 4 charging process LED indicators flash, press button to choose battery charging mode, without any sellection, charger will automatically identify battery. Features High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH/Ni-Cd batteries. Max 1000mA charging current, fast charge to save your time. One button easy control all charging status. Soft-start function, to avoid damage from large current charge and safely  charge small capacity batteries. LED indicator display battery charging process. Two charging current options. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Caution: For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury! M1 intelligent USB charger – Specifications Input voltage: DC 5V Output voltage: 4.35V±0.05V / 4.2V±0.05V / 1.45V±0.05V /3.65±0.05V Output current: 1*500 mA / 1*1000 mA Li-ion/IMR/LiFePO4:26650,22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at Li-ion batteries. Weight:  46g (without USB cable) Size: 113mm*29.5mm*38mm Storage temperature: -20℃~ 60℃ Operations Button: power connetion, hold press button 2 seconds to switch charging current as 500mA or 1000mA. Insert the battery, press button to change charging modes. LED indicator: power connetion, all of indicators light, if no battery in the slot, 500mAh indicator constant on, others off. Insert the battery, 4 charging process LED indicators flash, press button to choose battery charging mode, without any sellection, charger will automatically identify battery. Features High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH/Ni-Cd batteries. Max 1000mA charging current, fast charge to save your time. One button easy control all charging status. Soft-start function, to avoid damage from large current charge and safely  charge small capacity batteries. LED indicator display battery charging process. Two charging current options. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Caution: For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury! M1 intelligent USB charger – Specifications Input voltage: DC 5V Output voltage: 4.35V±0.05V / 4.2V±0.05V / 1.45V±0.05V /3.65±0.05V Output current: 1*500 mA / 1*1000 mA Li-ion/IMR/LiFePO4:26650,22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C USB output: 5V 1A USB output no-load voltage: 4.90V ~ 5.30V Max output current:1000mA Over-discharge protection voltage: 3.0V±0.1V Note: USB output function only work at Li-ion batteries. Weight:  46g (without USB cable) Size: 113mm*29.5mm*38mm Storage temperature: -20℃~ 60℃ Operations Button: power connetion, hold press button 2 seconds to switch charging current as 500mA or 1000mA. Insert the battery, press button to change charging modes. LED indicator: power connetion, all of indicators light, if no battery in the slot, 500mAh indicator constant on, others off. Insert the battery, 4 charging process LED indicators flash, press button to choose battery charging mode, without any sellection, charger will automatically identify battery. Features High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH/Ni-Cd batteries. Max 1000mA charging current, fast charge to save your time. One button easy control all charging status. Soft-start function, to avoid damage from large current charge and safely  charge small capacity batteries. LED indicator display battery charging process. Two charging current options. Reverse polarity protection,to protect from improper battery installation. Short-circuit, over-load and over-heat protected, intelligent circuits. Three-stage charge (CC, CV and Trickle Charge). Use new  fire-retardant flame-resistant material for safety. 0V activation function can wake up the over-discharged sleeping batteries USB output function, can be portable power source for your mobile devices. Caution: For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury!
Posted in Chargers, Skilhunt, Sports, Stores

M1 intelligent USB charger – Specifications Input voltage: DC 5V Output voltage: 4.35V±0.05V / 4.2V±0.05V / 1.45V±0.05V /3.65±0.05V Output current: 1*500 mA / 1*1000 mA Li-ion/IMR/LiFePO4:26650,22650,18650,17670,18490,17500,17335,16340(RCR123),14500 Ni-MH / Ni-Cd: AA,AAA,SC,C USB output: 5V 1A...

Buy At Vendors Site

BL-135 3500mAh 18650 Protected Battery – Note: The price is for 1pcs battery.   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Micro-porous separator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(13~17A)   Model: BL-135 Rated Capacity: 3500 mAh Nominal Voltage: 3.6 v Charging Current: Recommend 1A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 49 g / 1.72 oz Size: Length 69mm / 2.71”, Diameter 18.6 mm / 0.73” BL-135 3500mAh 18650 Protected Battery – Note: The price is for 1pcs battery.   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Micro-porous separator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(13~17A)   Model: BL-135 Rated Capacity: 3500 mAh Nominal Voltage: 3.6 v Charging Current: Recommend 1A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 49 g / 1.72 oz Size: Length 69mm / 2.71”, Diameter 18.6 mm / 0.73” BL-135 3500mAh 18650 Protected Battery – Note: The price is for 1pcs battery.   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Micro-porous separator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(13~17A)   Model: BL-135 Rated Capacity: 3500 mAh Nominal Voltage: 3.6 v Charging Current: Recommend 1A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 49 g / 1.72 oz Size: Length 69mm / 2.71”, Diameter 18.6 mm / 0.73” BL-135 3500mAh 18650 Protected Battery – Note: The price is for 1pcs battery.   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Micro-porous separator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(13~17A)   Model: BL-135 Rated Capacity: 3500 mAh Nominal Voltage: 3.6 v Charging Current: Recommend 1A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 49 g / 1.72 oz Size: Length 69mm / 2.71”, Diameter 18.6 mm / 0.73”
Posted in Batteries, Skilhunt, Sports, Stores

BL-135 3500mAh 18650 Protected Battery – Note: The price is for 1pcs...

Buy At Vendors Site

BL-108 800mAh AA 14500 Protected Battery – Note: The price is for 1pcs battery. Continuous Discharge Current(Max) 2A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(4~8A)   Model: BL-108 Rated Capacity: 800 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 400ma Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 20.6 g / 0.73 oz Size: Length 52.8mm / 2.08”, Diameter 14.6 mm / 0.57” BL-108 800mAh AA 14500 Protected Battery – Note: The price is for 1pcs battery. Continuous Discharge Current(Max) 2A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(4~8A)   Model: BL-108 Rated Capacity: 800 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 400ma Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 20.6 g / 0.73 oz Size: Length 52.8mm / 2.08”, Diameter 14.6 mm / 0.57” BL-108 800mAh AA 14500 Protected Battery – Note: The price is for 1pcs battery. Continuous Discharge Current(Max) 2A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(4~8A)   Model: BL-108 Rated Capacity: 800 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 400ma Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 20.6 g / 0.73 oz Size: Length 52.8mm / 2.08”, Diameter 14.6 mm / 0.57” BL-108 800mAh AA 14500 Protected Battery – Note: The price is for 1pcs battery. Continuous Discharge Current(Max) 2A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(4~8A)   Model: BL-108 Rated Capacity: 800 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 400ma Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 20.6 g / 0.73 oz Size: Length 52.8mm / 2.08”, Diameter 14.6 mm / 0.57”
Posted in Batteries, Skilhunt, Sports, Stores

BL-108 800mAh AA 14500 Protected Battery – Note: The price is for...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

MC10, MC20, MC10-C, MC20-C USB magnetic charging cables – MC10 USB magnetic...

Buy At Vendors Site

S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment.
Posted in S Series, Skilhunt, Sports, Stores

S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

HB3 headband – HB3 headband

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

Lanyard –

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

Mesh gear bag – Mesh Gear Bag for Flashlight & Headlamp Size:...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

Double sided clip – Stainless Steel Pocket Clip Black color: with PVD...

Buy At Vendors Site

EC300 2600 lumens RGBW Multi-color 21700 Rechargeable LED flashlight – EC300 RGBW Multi-color 21700 Rechargeable USB-C PD LED flashlight LED: Luminus SST-20 x 4  + RGB LEDs Max output: White : LED  2600 Lumens,  ANSI 2300 Lumens (CW) , ANSI 1500 Lumens (High CRI) Red: 10 Lumens / wavelength 620-625 nm ,  Green: 28 Lumens / wavelength 525-530 nm, Blue: 7.5 Lumens / wavelength 455-460 nm Max runtime: 30 days Quiescent Current (mA):0.05 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×21700 Rated range: 2.8-4.2V,(Recommended 21700 battery that max discharge current ≥8A) Dimension: L115mm/4.53″, Head diameter 29.5mm/1.16″,Body diameter 28mm/1.10”. Weight: 71.2 g / 2.50 oz (Excluded battery) Accessories: USB Charging Cable, Clip, Lanyard, Spare O-rings. How To Use: 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level (H-M1-M2). Quickly double clicks switch to Turbo mode (T1/T2) . Quickly triple-click switch to Strobe mode (S1/S2/S3/S4). Hold press switch 0.5 second to Low mode (L1/L2) or Color mode (R/G/B). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2, R/G/B) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (L1/L2,R/G/B) Quickly double clicks switch tranfer Low mode (L1/L2) to Color mode (R/G/B) When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3/S4) Quickly double clicks switch tranfer S1-S2-S3-S4, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging indicator Red (charging) Blue (completed) Charging Connect the USB charging cable to an external USB power source then attach the other end of the cable to the charging port of the light. (Recommeded USB power no less than 10W (5V 2A) ,Compatible with PD chargers) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 21700 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,chagring will damage the charging circuit. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2600 Lumens EDC flashlight with RGB colors light – Customized user interface,Programmable variety of brightness – Integrated charging / discharging system that compatible with USB-C PD – Ultra efficiency circuit design, Up to 30 days runtime – Efficient Carclo Quad optic Frosted TIR Lens – Powered by a single 21700 rechargeable battery – Two-color indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. – Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark.   Reviews: Skilhunt EC300 Flashlight Review https://www.youtube.com/watch?v=XQ4NVqYl2c4 EC300 2600 lumens RGBW Multi-color 21700 Rechargeable LED flashlight – EC300 RGBW Multi-color 21700 Rechargeable USB-C PD LED flashlight LED: Luminus SST-20 x 4  + RGB LEDs Max output: White : LED  2600 Lumens,  ANSI 2300 Lumens (CW) , ANSI 1500 Lumens (High CRI) Red: 10 Lumens / wavelength 620-625 nm ,  Green: 28 Lumens / wavelength 525-530 nm, Blue: 7.5 Lumens / wavelength 455-460 nm Max runtime: 30 days Quiescent Current (mA):0.05 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×21700 Rated range: 2.8-4.2V,(Recommended 21700 battery that max discharge current ≥8A) Dimension: L115mm/4.53″, Head diameter 29.5mm/1.16″,Body diameter 28mm/1.10”. Weight: 71.2 g / 2.50 oz (Excluded battery) Accessories: USB Charging Cable, Clip, Lanyard, Spare O-rings. How To Use: 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level (H-M1-M2). Quickly double clicks switch to Turbo mode (T1/T2) . Quickly triple-click switch to Strobe mode (S1/S2/S3/S4). Hold press switch 0.5 second to Low mode (L1/L2) or Color mode (R/G/B). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2, R/G/B) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (L1/L2,R/G/B) Quickly double clicks switch tranfer Low mode (L1/L2) to Color mode (R/G/B) When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3/S4) Quickly double clicks switch tranfer S1-S2-S3-S4, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging indicator Red (charging) Blue (completed) Charging Connect the USB charging cable to an external USB power source then attach the other end of the cable to the charging port of the light. (Recommeded USB power no less than 10W (5V 2A) ,Compatible with PD chargers) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 21700 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,chagring will damage the charging circuit. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2600 Lumens EDC flashlight with RGB colors light – Customized user interface,Programmable variety of brightness – Integrated charging / discharging system that compatible with USB-C PD – Ultra efficiency circuit design, Up to 30 days runtime – Efficient Carclo Quad optic Frosted TIR Lens – Powered by a single 21700 rechargeable battery – Two-color indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. – Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark.   Reviews: Skilhunt EC300 Flashlight Review https://www.youtube.com/watch?v=XQ4NVqYl2c4 EC300 2600 lumens RGBW Multi-color 21700 Rechargeable LED flashlight – EC300 RGBW Multi-color 21700 Rechargeable USB-C PD LED flashlight LED: Luminus SST-20 x 4  + RGB LEDs Max output: White : LED  2600 Lumens,  ANSI 2300 Lumens (CW) , ANSI 1500 Lumens (High CRI) Red: 10 Lumens / wavelength 620-625 nm ,  Green: 28 Lumens / wavelength 525-530 nm, Blue: 7.5 Lumens / wavelength 455-460 nm Max runtime: 30 days Quiescent Current (mA):0.05 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×21700 Rated range: 2.8-4.2V,(Recommended 21700 battery that max discharge current ≥8A) Dimension: L115mm/4.53″, Head diameter 29.5mm/1.16″,Body diameter 28mm/1.10”. Weight: 71.2 g / 2.50 oz (Excluded battery) Accessories: USB Charging Cable, Clip, Lanyard, Spare O-rings. How To Use: 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level (H-M1-M2). Quickly double clicks switch to Turbo mode (T1/T2) . Quickly triple-click switch to Strobe mode (S1/S2/S3/S4). Hold press switch 0.5 second to Low mode (L1/L2) or Color mode (R/G/B). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2, R/G/B) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (L1/L2,R/G/B) Quickly double clicks switch tranfer Low mode (L1/L2) to Color mode (R/G/B) When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3/S4) Quickly double clicks switch tranfer S1-S2-S3-S4, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging indicator Red (charging) Blue (completed) Charging Connect the USB charging cable to an external USB power source then attach the other end of the cable to the charging port of the light. (Recommeded USB power no less than 10W (5V 2A) ,Compatible with PD chargers) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 21700 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,chagring will damage the charging circuit. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2600 Lumens EDC flashlight with RGB colors light – Customized user interface,Programmable variety of brightness – Integrated charging / discharging system that compatible with USB-C PD – Ultra efficiency circuit design, Up to 30 days runtime – Efficient Carclo Quad optic Frosted TIR Lens – Powered by a single 21700 rechargeable battery – Two-color indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. – Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark.   Reviews: Skilhunt EC300 Flashlight Review https://www.youtube.com/watch?v=XQ4NVqYl2c4 EC300 2600 lumens RGBW Multi-color 21700 Rechargeable LED flashlight – EC300 RGBW Multi-color 21700 Rechargeable USB-C PD LED flashlight LED: Luminus SST-20 x 4  + RGB LEDs Max output: White : LED  2600 Lumens,  ANSI 2300 Lumens (CW) , ANSI 1500 Lumens (High CRI) Red: 10 Lumens / wavelength 620-625 nm ,  Green: 28 Lumens / wavelength 525-530 nm, Blue: 7.5 Lumens / wavelength 455-460 nm Max runtime: 30 days Quiescent Current (mA):0.05 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×21700 Rated range: 2.8-4.2V,(Recommended 21700 battery that max discharge current ≥8A) Dimension: L115mm/4.53″, Head diameter 29.5mm/1.16″,Body diameter 28mm/1.10”. Weight: 71.2 g / 2.50 oz (Excluded battery) Accessories: USB Charging Cable, Clip, Lanyard, Spare O-rings. How To Use: 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level (H-M1-M2). Quickly double clicks switch to Turbo mode (T1/T2) . Quickly triple-click switch to Strobe mode (S1/S2/S3/S4). Hold press switch 0.5 second to Low mode (L1/L2) or Color mode (R/G/B). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2, R/G/B) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (L1/L2,R/G/B) Quickly double clicks switch tranfer Low mode (L1/L2) to Color mode (R/G/B) When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3/S4) Quickly double clicks switch tranfer S1-S2-S3-S4, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging indicator Red (charging) Blue (completed) Charging Connect the USB charging cable to an external USB power source then attach the other end of the cable to the charging port of the light. (Recommeded USB power no less than 10W (5V 2A) ,Compatible with PD chargers) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 21700 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,chagring will damage the charging circuit. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2600 Lumens EDC flashlight with RGB colors light – Customized user interface,Programmable variety of brightness – Integrated charging / discharging system that compatible with USB-C PD – Ultra efficiency circuit design, Up to 30 days runtime – Efficient Carclo Quad optic Frosted TIR Lens – Powered by a single 21700 rechargeable battery – Two-color indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. – Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark.   Reviews: Skilhunt EC300 Flashlight Review https://www.youtube.com/watch?v=XQ4NVqYl2c4
Posted in 15% Off, Skilhunt, Sports, Stores

EC300 2600 lumens RGBW Multi-color 21700 Rechargeable LED flashlight – EC300 RGBW...

Buy At Vendors Site

BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery – Note: This price is for 1pcs battery.   BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(15~20A)   Model: BL-250 Rated Capicity: 5000 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 1-2A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 72.8 g / 2.57 oz Size: Length 76 mm / 2.99”, Diameter 21.6 mm / 0.85” BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery – Note: This price is for 1pcs battery.   BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(15~20A)   Model: BL-250 Rated Capicity: 5000 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 1-2A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 72.8 g / 2.57 oz Size: Length 76 mm / 2.99”, Diameter 21.6 mm / 0.85” BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery – Note: This price is for 1pcs battery.   BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(15~20A)   Model: BL-250 Rated Capicity: 5000 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 1-2A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 72.8 g / 2.57 oz Size: Length 76 mm / 2.99”, Diameter 21.6 mm / 0.85” BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery – Note: This price is for 1pcs battery.   BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery   Continuous Discharge Current(Max) 8A Multiple protection Pressure relief vent valve Microporous seprator Short-circuit Protection   Protection circuit Over-charge Protection(4.30±0.050V) Over-discharge protection(2.50±0.10V) Over current protection(15~20A)   Model: BL-250 Rated Capicity: 5000 mAh Nominal Voltage: 3.6 v Charging Current: Recommed 1-2A Discharge end-off voltage: 2.50 v Charge voltage: 4.20 v Weight: 72.8 g / 2.57 oz Size: Length 76 mm / 2.99”, Diameter 21.6 mm / 0.85”
Posted in Batteries, Skilhunt, Sports, Stores

BL-250 5000mAh 21700 Li-ion Rechargeable Protected Battery – Note: This price is...

Buy At Vendors Site

Posted in Batteries, Skilhunt, Sports, Stores

BL-111 1100mAh 18350 Protected Battery – Note: This price is for 1pcs...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

HB3 headband’s mount – Please note that this mount is for HB3...

Buy At Vendors Site

Posted in Accessories, Skilhunt, Sports, Stores

TIR Optics – [vc_row][vc_column][vc_column_text css=””] Model: H200 / EC150 Lens EC300 Lens...

Buy At Vendors Site

Posted in E Series, Skilhunt, Sports, Stores

E2A 14500 / AA 600 lumens Pocket EDC Mini LED Flashlight –...

Buy At Vendors Site

E3A AAA 100 lumens Pocket EDC Keychain Mini LED Flashlight – E3A keychain LED flashlight Max output: ANSI 100 Lumens Max runtime: 100 minutes Max beam distance: 37 meters Max peak beam intensity: 350cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: Uses 1xAAA 1.5V Alkaline , 1xAAA 1.2V Ni-MH or 1xAAA 1.5V Lithuim Rated Range: 0.8V ~ 2V Dimension: Length 59.5 mm / 2.34 inch Head diameter 14.0 mm / 0.59 inch Weight: 7.5 g / 0.26 oz (without battery) Included: 1x E3A, 1xAAA Alkaline battery, Keyring, Operator’s manual, Spare O-ring Optional: Key holder Operation Battery installation: Insert the battery positive pole toward the light head, otherwise it will not work. When the light turning on, the beam is directed away from the eyes. Take out the battery if you are storing the flashlight for a lont period of time to prevent the battery from leaking. Flashlight turning on/off: Fully tighten the tube/tail to turn the light on. Twist the tube/tail to turn off the light. Features Powered by a convenient and widely available single AAA battery producing an output of 100 lumens. Made by durable aluminum Extremely easy carry: Barely know it is there with its lightweight and small size. Waterproof to IPX-8 Standard TIR optic lens producing a soft and balanced beam for comfortable use.   E3A AAA 100 lumens Pocket EDC Keychain Mini LED Flashlight – E3A keychain LED flashlight Max output: ANSI 100 Lumens Max runtime: 100 minutes Max beam distance: 37 meters Max peak beam intensity: 350cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: Uses 1xAAA 1.5V Alkaline , 1xAAA 1.2V Ni-MH or 1xAAA 1.5V Lithuim Rated Range: 0.8V ~ 2V Dimension: Length 59.5 mm / 2.34 inch Head diameter 14.0 mm / 0.59 inch Weight: 7.5 g / 0.26 oz (without battery) Included: 1x E3A, 1xAAA Alkaline battery, Keyring, Operator’s manual, Spare O-ring Optional: Key holder Operation Battery installation: Insert the battery positive pole toward the light head, otherwise it will not work. When the light turning on, the beam is directed away from the eyes. Take out the battery if you are storing the flashlight for a lont period of time to prevent the battery from leaking. Flashlight turning on/off: Fully tighten the tube/tail to turn the light on. Twist the tube/tail to turn off the light. Features Powered by a convenient and widely available single AAA battery producing an output of 100 lumens. Made by durable aluminum Extremely easy carry: Barely know it is there with its lightweight and small size. Waterproof to IPX-8 Standard TIR optic lens producing a soft and balanced beam for comfortable use.   E3A AAA 100 lumens Pocket EDC Keychain Mini LED Flashlight – E3A keychain LED flashlight Max output: ANSI 100 Lumens Max runtime: 100 minutes Max beam distance: 37 meters Max peak beam intensity: 350cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: Uses 1xAAA 1.5V Alkaline , 1xAAA 1.2V Ni-MH or 1xAAA 1.5V Lithuim Rated Range: 0.8V ~ 2V Dimension: Length 59.5 mm / 2.34 inch Head diameter 14.0 mm / 0.59 inch Weight: 7.5 g / 0.26 oz (without battery) Included: 1x E3A, 1xAAA Alkaline battery, Keyring, Operator’s manual, Spare O-ring Optional: Key holder Operation Battery installation: Insert the battery positive pole toward the light head, otherwise it will not work. When the light turning on, the beam is directed away from the eyes. Take out the battery if you are storing the flashlight for a lont period of time to prevent the battery from leaking. Flashlight turning on/off: Fully tighten the tube/tail to turn the light on. Twist the tube/tail to turn off the light. Features Powered by a convenient and widely available single AAA battery producing an output of 100 lumens. Made by durable aluminum Extremely easy carry: Barely know it is there with its lightweight and small size. Waterproof to IPX-8 Standard TIR optic lens producing a soft and balanced beam for comfortable use.   E3A AAA 100 lumens Pocket EDC Keychain Mini LED Flashlight – E3A keychain LED flashlight Max output: ANSI 100 Lumens Max runtime: 100 minutes Max beam distance: 37 meters Max peak beam intensity: 350cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: Uses 1xAAA 1.5V Alkaline , 1xAAA 1.2V Ni-MH or 1xAAA 1.5V Lithuim Rated Range: 0.8V ~ 2V Dimension: Length 59.5 mm / 2.34 inch Head diameter 14.0 mm / 0.59 inch Weight: 7.5 g / 0.26 oz (without battery) Included: 1x E3A, 1xAAA Alkaline battery, Keyring, Operator’s manual, Spare O-ring Optional: Key holder Operation Battery installation: Insert the battery positive pole toward the light head, otherwise it will not work. When the light turning on, the beam is directed away from the eyes. Take out the battery if you are storing the flashlight for a lont period of time to prevent the battery from leaking. Flashlight turning on/off: Fully tighten the tube/tail to turn the light on. Twist the tube/tail to turn off the light. Features Powered by a convenient and widely available single AAA battery producing an output of 100 lumens. Made by durable aluminum Extremely easy carry: Barely know it is there with its lightweight and small size. Waterproof to IPX-8 Standard TIR optic lens producing a soft and balanced beam for comfortable use.  
Posted in E Series, Skilhunt, Sports, Stores

E3A AAA 100 lumens Pocket EDC Keychain Mini LED Flashlight – E3A...

Buy At Vendors Site

M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text...

Buy At Vendors Site

H150 AA/14500 USB Magnetic Rechargeable Headlamp – [vc_row][vc_column][vc_column_text css=””] LED: Cool White 5700K~6500K / Neutral White Nichia 519A CRI90 5000K /Warm White Nichia 519A CRI90 3000K Max output: Cool White ANSI 1070 Lumens / 5000K 645 Lumens / 3000K 560 Lumens Quiescent Current : 45μA (14500 battery) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “. Weight: 33 g / 1.16 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level(H-M1-M2). Quickly double clicks switch to Trubo(T1/T2). Quickly triple-click switch to Strobe(S1/S2/S3). Hold press switch 0.5 second to Low(L1/L2). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON Memory level(H/M1/M2) Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly double clicks switch back to Memory level. Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back to Memory level. Quickly click and hold switch tranfer Memory level to Low, repeat quickly click and hold switch back to Memory level. When the flashlight was ON Strobe(S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. !!!  Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Features 1.Super bright & latest  LED, Max 1070 lumens. High-Performance, High-Efficiency and energy conservation. 2.Buck-Boost driver, provides constant brightness, lower heat. 3.Built-in magnetic charging system, fast charge and convenient. 4.Rugged indestructible aluminum body with anti-scratching type III hard anodization 5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Side switch button to transferring mode user-friendly interface to adjust output. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candlelight, etc. 14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime.[/vc_column_text][/vc_column][/vc_row] H150 AA/14500 USB Magnetic Rechargeable Headlamp – [vc_row][vc_column][vc_column_text css=””] LED: Cool White 5700K~6500K / Neutral White Nichia 519A CRI90 5000K /Warm White Nichia 519A CRI90 3000K Max output: Cool White ANSI 1070 Lumens / 5000K 645 Lumens / 3000K 560 Lumens Quiescent Current : 45μA (14500 battery) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “. Weight: 33 g / 1.16 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level(H-M1-M2). Quickly double clicks switch to Trubo(T1/T2). Quickly triple-click switch to Strobe(S1/S2/S3). Hold press switch 0.5 second to Low(L1/L2). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON Memory level(H/M1/M2) Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly double clicks switch back to Memory level. Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back to Memory level. Quickly click and hold switch tranfer Memory level to Low, repeat quickly click and hold switch back to Memory level. When the flashlight was ON Strobe(S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. !!!  Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Features 1.Super bright & latest  LED, Max 1070 lumens. High-Performance, High-Efficiency and energy conservation. 2.Buck-Boost driver, provides constant brightness, lower heat. 3.Built-in magnetic charging system, fast charge and convenient. 4.Rugged indestructible aluminum body with anti-scratching type III hard anodization 5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Side switch button to transferring mode user-friendly interface to adjust output. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candlelight, etc. 14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime.[/vc_column_text][/vc_column][/vc_row] H150 AA/14500 USB Magnetic Rechargeable Headlamp – [vc_row][vc_column][vc_column_text css=””] LED: Cool White 5700K~6500K / Neutral White Nichia 519A CRI90 5000K /Warm White Nichia 519A CRI90 3000K Max output: Cool White ANSI 1070 Lumens / 5000K 645 Lumens / 3000K 560 Lumens Quiescent Current : 45μA (14500 battery) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “. Weight: 33 g / 1.16 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level(H-M1-M2). Quickly double clicks switch to Trubo(T1/T2). Quickly triple-click switch to Strobe(S1/S2/S3). Hold press switch 0.5 second to Low(L1/L2). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON Memory level(H/M1/M2) Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly double clicks switch back to Memory level. Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back to Memory level. Quickly click and hold switch tranfer Memory level to Low, repeat quickly click and hold switch back to Memory level. When the flashlight was ON Strobe(S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. !!!  Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Features 1.Super bright & latest  LED, Max 1070 lumens. High-Performance, High-Efficiency and energy conservation. 2.Buck-Boost driver, provides constant brightness, lower heat. 3.Built-in magnetic charging system, fast charge and convenient. 4.Rugged indestructible aluminum body with anti-scratching type III hard anodization 5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Side switch button to transferring mode user-friendly interface to adjust output. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candlelight, etc. 14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime.[/vc_column_text][/vc_column][/vc_row] H150 AA/14500 USB Magnetic Rechargeable Headlamp – [vc_row][vc_column][vc_column_text css=””] LED: Cool White 5700K~6500K / Neutral White Nichia 519A CRI90 5000K /Warm White Nichia 519A CRI90 3000K Max output: Cool White ANSI 1070 Lumens / 5000K 645 Lumens / 3000K 560 Lumens Quiescent Current : 45μA (14500 battery) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: L79.8mm / 3.14″, Head diameter 21.4mm / 0.84 “. Weight: 33 g / 1.16 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Headband, Magnetic Charging Cable . Operation 1,Battery installation & Replace magnet: Insert the battery positive pole toward the light head.,otherwise it will not work. When the light turning on,the beam is directed away from the eyes.When take the light with Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad. 1. ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to Memory level(H-M1-M2). Quickly double clicks switch to Trubo(T1/T2). Quickly triple-click switch to Strobe(S1/S2/S3). Hold press switch 0.5 second to Low(L1/L2). When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON Memory level(H/M1/M2) Quickly double clicks switch tranfer Memory level to Trubo, repeat quickly double clicks switch back to Memory level. Quickly triple clicks switch transfer Strobe, repeat quickly triple clicks switch back to Memory level. Quickly click and hold switch tranfer Memory level to Low, repeat quickly click and hold switch back to Memory level. When the flashlight was ON Strobe(S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. 5. Charging instructions and notices: Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. !!!  Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Features 1.Super bright & latest  LED, Max 1070 lumens. High-Performance, High-Efficiency and energy conservation. 2.Buck-Boost driver, provides constant brightness, lower heat. 3.Built-in magnetic charging system, fast charge and convenient. 4.Rugged indestructible aluminum body with anti-scratching type III hard anodization 5.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Side switch button to transferring mode user-friendly interface to adjust output. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 12.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candlelight, etc. 14. Waterproof to IPX-8 Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime.[/vc_column_text][/vc_column][/vc_row]
Posted in ESKTE, Skilhunt, Sports, Stores

H150 AA/14500 USB Magnetic Rechargeable Headlamp – [vc_row][vc_column][vc_column_text css=””] LED: Cool White...

Buy At Vendors Site

H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc.
Posted in Flash Sale, Skilhunt, Sports, Stores

H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool...

Buy At Vendors Site

H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.  
Posted in Flash Sale, Skilhunt, Sports, Stores

H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04...

Buy At Vendors Site

H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.
Posted in Flash Sale, Skilhunt, Sports, Stores

H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini...

Buy At Vendors Site

BL-133C 3300mAh 18650 Built-in USB-C Port Protected Battery – BL-133C Battery 18650 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Rated Capacity: 3300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 8A Weight: 48 g/1.620z Size: Length 69.5 mm / 2.73”, Diameter 18.8 mm/0.74” CHARGING INDICATOR Charging (Red) Charging completed(Blue Charging calbe:USB A-C orC-C TYPE-C charging:5.0v 1.3A Battery charger: 4.2v1.5A(Max 3A) BL-133C 3300mAh 18650 Built-in USB-C Port Protected Battery – BL-133C Battery 18650 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Rated Capacity: 3300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 8A Weight: 48 g/1.620z Size: Length 69.5 mm / 2.73”, Diameter 18.8 mm/0.74” CHARGING INDICATOR Charging (Red) Charging completed(Blue Charging calbe:USB A-C orC-C TYPE-C charging:5.0v 1.3A Battery charger: 4.2v1.5A(Max 3A) BL-133C 3300mAh 18650 Built-in USB-C Port Protected Battery – BL-133C Battery 18650 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Rated Capacity: 3300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 8A Weight: 48 g/1.620z Size: Length 69.5 mm / 2.73”, Diameter 18.8 mm/0.74” CHARGING INDICATOR Charging (Red) Charging completed(Blue Charging calbe:USB A-C orC-C TYPE-C charging:5.0v 1.3A Battery charger: 4.2v1.5A(Max 3A) BL-133C 3300mAh 18650 Built-in USB-C Port Protected Battery – BL-133C Battery 18650 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Rated Capacity: 3300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 8A Weight: 48 g/1.620z Size: Length 69.5 mm / 2.73”, Diameter 18.8 mm/0.74” CHARGING INDICATOR Charging (Red) Charging completed(Blue Charging calbe:USB A-C orC-C TYPE-C charging:5.0v 1.3A Battery charger: 4.2v1.5A(Max 3A)
Posted in Batteries, Skilhunt, Sports, Stores

BL-133C 3300mAh 18650 Built-in USB-C Port Protected Battery – BL-133C Battery 18650...

Buy At Vendors Site

BL-113C 1300mAh 14500 Built-in USB-C Port Protected Battery – BL-113C Battery 14500 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Mode: BL-113C Rated capacity: 1300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 3A Weight: 20 g/0.71 oz Size: Length 50.5mm/1.99” Diameter 14.5 mm/0.57” CHARGING INDICATOR Charging(Red) Charging completed(Blue) Charging cable: USB A-C or C-C TYPE-C Charging :5.0V0.47±0.05A Battery charger: 4.2V1A(Max 1.5A) Mulfple protection Pressure relef vent valve Microporous separator Short-circuit Protection Protection circuit Over-charge Protection Voltage(4.30±0.050V) over-discharge protectionVoltage(2.50±0.10V Over-current protection Current(5-8A) BL-113C 1300mAh 14500 Built-in USB-C Port Protected Battery – BL-113C Battery 14500 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Mode: BL-113C Rated capacity: 1300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 3A Weight: 20 g/0.71 oz Size: Length 50.5mm/1.99” Diameter 14.5 mm/0.57” CHARGING INDICATOR Charging(Red) Charging completed(Blue) Charging cable: USB A-C or C-C TYPE-C Charging :5.0V0.47±0.05A Battery charger: 4.2V1A(Max 1.5A) Mulfple protection Pressure relef vent valve Microporous separator Short-circuit Protection Protection circuit Over-charge Protection Voltage(4.30±0.050V) over-discharge protectionVoltage(2.50±0.10V Over-current protection Current(5-8A) BL-113C 1300mAh 14500 Built-in USB-C Port Protected Battery – BL-113C Battery 14500 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Mode: BL-113C Rated capacity: 1300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 3A Weight: 20 g/0.71 oz Size: Length 50.5mm/1.99” Diameter 14.5 mm/0.57” CHARGING INDICATOR Charging(Red) Charging completed(Blue) Charging cable: USB A-C or C-C TYPE-C Charging :5.0V0.47±0.05A Battery charger: 4.2V1A(Max 1.5A) Mulfple protection Pressure relef vent valve Microporous separator Short-circuit Protection Protection circuit Over-charge Protection Voltage(4.30±0.050V) over-discharge protectionVoltage(2.50±0.10V Over-current protection Current(5-8A) BL-113C 1300mAh 14500 Built-in USB-C Port Protected Battery – BL-113C Battery 14500 Rechargeable Li-ion Battery BUILT-IN TYPE-C PORT Mode: BL-113C Rated capacity: 1300 mAh Nominal Voltage: 3.60 v Charge voltage: 4.20 v Discharge end-off voltage: 2.50 v Continuous Discharge Current: 3A Weight: 20 g/0.71 oz Size: Length 50.5mm/1.99” Diameter 14.5 mm/0.57” CHARGING INDICATOR Charging(Red) Charging completed(Blue) Charging cable: USB A-C or C-C TYPE-C Charging :5.0V0.47±0.05A Battery charger: 4.2V1A(Max 1.5A) Mulfple protection Pressure relef vent valve Microporous separator Short-circuit Protection Protection circuit Over-charge Protection Voltage(4.30±0.050V) over-discharge protectionVoltage(2.50±0.10V Over-current protection Current(5-8A)
Posted in Batteries, Skilhunt, Sports, Stores

BL-113C 1300mAh 14500 Built-in USB-C Port Protected Battery – BL-113C Battery 14500...

Buy At Vendors Site

21700 Battery Extender / Spacer – [vc_row][vc_column][vc_column_text css=””]21700 Battery Extender / Spacer Designed for: Skilhunt M300 V4 Product Description: This precision-machined battery extender (spacer) is specifically designed for the M300 V4, allowing it to reliably use both unprotected flat-top 21700 cells and protected 21700 batteries. Specifications: Diameter: 21.9 mm Long version thickness: 7 mm Short version thickness: 2 mm Usage: 7mm Long Extender / Spacer: Ideal for shorter unprotected 21700 cells. Adds the necessary length to achieve proper spring pressure and reliable contact. 2mm Short Extender / Spacer: Recommended for protected 21700 batteries. Eliminates any gap and prevents battery rattle. Key Benefits: Enables perfect compatibility with both protected and unprotected 21700 batteries Solves contact issues with shorter cells Easy to install – simply place between the battery and tailcap spring Minimal added weight, maintains excellent conductivity With this extender kit, your M300 V4 becomes much more versatile, giving you the freedom to use a wider range of high-capacity 21700 batteries without any compatibility concerns. The price is for a single unit.[/vc_column_text][/vc_column][/vc_row] 21700 Battery Extender / Spacer – [vc_row][vc_column][vc_column_text css=””]21700 Battery Extender / Spacer Designed for: Skilhunt M300 V4 Product Description: This precision-machined battery extender (spacer) is specifically designed for the M300 V4, allowing it to reliably use both unprotected flat-top 21700 cells and protected 21700 batteries. Specifications: Diameter: 21.9 mm Long version thickness: 7 mm Short version thickness: 2 mm Usage: 7mm Long Extender / Spacer: Ideal for shorter unprotected 21700 cells. Adds the necessary length to achieve proper spring pressure and reliable contact. 2mm Short Extender / Spacer: Recommended for protected 21700 batteries. Eliminates any gap and prevents battery rattle. Key Benefits: Enables perfect compatibility with both protected and unprotected 21700 batteries Solves contact issues with shorter cells Easy to install – simply place between the battery and tailcap spring Minimal added weight, maintains excellent conductivity With this extender kit, your M300 V4 becomes much more versatile, giving you the freedom to use a wider range of high-capacity 21700 batteries without any compatibility concerns. The price is for a single unit.[/vc_column_text][/vc_column][/vc_row] 21700 Battery Extender / Spacer – [vc_row][vc_column][vc_column_text css=””]21700 Battery Extender / Spacer Designed for: Skilhunt M300 V4 Product Description: This precision-machined battery extender (spacer) is specifically designed for the M300 V4, allowing it to reliably use both unprotected flat-top 21700 cells and protected 21700 batteries. Specifications: Diameter: 21.9 mm Long version thickness: 7 mm Short version thickness: 2 mm Usage: 7mm Long Extender / Spacer: Ideal for shorter unprotected 21700 cells. Adds the necessary length to achieve proper spring pressure and reliable contact. 2mm Short Extender / Spacer: Recommended for protected 21700 batteries. Eliminates any gap and prevents battery rattle. Key Benefits: Enables perfect compatibility with both protected and unprotected 21700 batteries Solves contact issues with shorter cells Easy to install – simply place between the battery and tailcap spring Minimal added weight, maintains excellent conductivity With this extender kit, your M300 V4 becomes much more versatile, giving you the freedom to use a wider range of high-capacity 21700 batteries without any compatibility concerns. The price is for a single unit.[/vc_column_text][/vc_column][/vc_row] 21700 Battery Extender / Spacer – [vc_row][vc_column][vc_column_text css=””]21700 Battery Extender / Spacer Designed for: Skilhunt M300 V4 Product Description: This precision-machined battery extender (spacer) is specifically designed for the M300 V4, allowing it to reliably use both unprotected flat-top 21700 cells and protected 21700 batteries. Specifications: Diameter: 21.9 mm Long version thickness: 7 mm Short version thickness: 2 mm Usage: 7mm Long Extender / Spacer: Ideal for shorter unprotected 21700 cells. Adds the necessary length to achieve proper spring pressure and reliable contact. 2mm Short Extender / Spacer: Recommended for protected 21700 batteries. Eliminates any gap and prevents battery rattle. Key Benefits: Enables perfect compatibility with both protected and unprotected 21700 batteries Solves contact issues with shorter cells Easy to install – simply place between the battery and tailcap spring Minimal added weight, maintains excellent conductivity With this extender kit, your M300 V4 becomes much more versatile, giving you the freedom to use a wider range of high-capacity 21700 batteries without any compatibility concerns. The price is for a single unit.[/vc_column_text][/vc_column][/vc_row]
Posted in Accessories, Skilhunt, Sports, Stores

21700 Battery Extender / Spacer – [vc_row][vc_column][vc_column_text css=””]21700 Battery Extender / Spacer...

Buy At Vendors Site

EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight – [vc_row][vc_column][vc_column_text css=””] The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight The EC200 series are compact and versatile flashlights designed for a variety of uses. The USB-C charging ensures convenience and efficiency, while their durable build makes them perfect for everyday carry, outdoor , camping, and home use. LED: 3 x CREE XP-G4,  Cool White 6500K 3 x  Nichia 519A Neutral White High CRI R9080 4500K 3 x Luminus SFT25R 5000K (new offer) Max output: CREE Cool White ANSI 2250 Lumens, Nichia High CRI 4500K ANSI 1550 Lumens,Luminus 5000K ANSI 1800 Lumens (Plain Lens) Peak Beam Intensity: 7700cd (CW) / 3600cd(519AT 4500K) / 13000cd (SFT25R 5000K ) Beam Distance: 175M(CW) / 120M (519A 45000K) / 228M (SFT25R 5000K) (EC200 SFT25R-5000K: 13000CD 228M  1750Lumens/880/475/160/47/4.5/0.5) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Lens compatible with 10507, 10508, 10509, 10510, 10511 Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: H: Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). From ON <Main Group>, <Turbo Group>, <Low Group> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From <Main Group> 2C: Enter into <Turbo Group>, repeat operation to returns to <Main Group>. 3C: Enter into <Strobe Group>, repeat operation to returns to <Main Group>. 1C&H: Enter into <Low Group>, repeat operation to returns to <Main Group>. From <Strobe Group> 2C: Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the light is off, quickly click the switch 4 times to enter the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks to turn on/off the indicator light). Quickly click the switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2250 Lumens powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – Three white LEDs wide flood illumination and ultra-bright output. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. -Magnetic tail stand -Double sides pocket clip   Illuminate your adventures with the SKILHUNT EC200—engineered for brilliance with triple white LEDs and a powerful 18650 battery. Whether you’re hiking rugged trails, camping under the stars, or tackling everyday tasks, the EC200 delivers ultra-bright floodlight, USB-C charging convenience, and rugged durability in a sleek, lightweight design.[/vc_column_text][/vc_column][/vc_row] EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight – [vc_row][vc_column][vc_column_text css=””] The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight The EC200 series are compact and versatile flashlights designed for a variety of uses. The USB-C charging ensures convenience and efficiency, while their durable build makes them perfect for everyday carry, outdoor , camping, and home use. LED: 3 x CREE XP-G4,  Cool White 6500K 3 x  Nichia 519A Neutral White High CRI R9080 4500K 3 x Luminus SFT25R 5000K (new offer) Max output: CREE Cool White ANSI 2250 Lumens, Nichia High CRI 4500K ANSI 1550 Lumens,Luminus 5000K ANSI 1800 Lumens (Plain Lens) Peak Beam Intensity: 7700cd (CW) / 3600cd(519AT 4500K) / 13000cd (SFT25R 5000K ) Beam Distance: 175M(CW) / 120M (519A 45000K) / 228M (SFT25R 5000K) (EC200 SFT25R-5000K: 13000CD 228M  1750Lumens/880/475/160/47/4.5/0.5) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Lens compatible with 10507, 10508, 10509, 10510, 10511 Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: H: Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). From ON <Main Group>, <Turbo Group>, <Low Group> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From <Main Group> 2C: Enter into <Turbo Group>, repeat operation to returns to <Main Group>. 3C: Enter into <Strobe Group>, repeat operation to returns to <Main Group>. 1C&H: Enter into <Low Group>, repeat operation to returns to <Main Group>. From <Strobe Group> 2C: Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the light is off, quickly click the switch 4 times to enter the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks to turn on/off the indicator light). Quickly click the switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2250 Lumens powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – Three white LEDs wide flood illumination and ultra-bright output. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. -Magnetic tail stand -Double sides pocket clip   Illuminate your adventures with the SKILHUNT EC200—engineered for brilliance with triple white LEDs and a powerful 18650 battery. Whether you’re hiking rugged trails, camping under the stars, or tackling everyday tasks, the EC200 delivers ultra-bright floodlight, USB-C charging convenience, and rugged durability in a sleek, lightweight design.[/vc_column_text][/vc_column][/vc_row] EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight – [vc_row][vc_column][vc_column_text css=””] The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight The EC200 series are compact and versatile flashlights designed for a variety of uses. The USB-C charging ensures convenience and efficiency, while their durable build makes them perfect for everyday carry, outdoor , camping, and home use. LED: 3 x CREE XP-G4,  Cool White 6500K 3 x  Nichia 519A Neutral White High CRI R9080 4500K 3 x Luminus SFT25R 5000K (new offer) Max output: CREE Cool White ANSI 2250 Lumens, Nichia High CRI 4500K ANSI 1550 Lumens,Luminus 5000K ANSI 1800 Lumens (Plain Lens) Peak Beam Intensity: 7700cd (CW) / 3600cd(519AT 4500K) / 13000cd (SFT25R 5000K ) Beam Distance: 175M(CW) / 120M (519A 45000K) / 228M (SFT25R 5000K) (EC200 SFT25R-5000K: 13000CD 228M  1750Lumens/880/475/160/47/4.5/0.5) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Lens compatible with 10507, 10508, 10509, 10510, 10511 Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: H: Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). From ON <Main Group>, <Turbo Group>, <Low Group> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From <Main Group> 2C: Enter into <Turbo Group>, repeat operation to returns to <Main Group>. 3C: Enter into <Strobe Group>, repeat operation to returns to <Main Group>. 1C&H: Enter into <Low Group>, repeat operation to returns to <Main Group>. From <Strobe Group> 2C: Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the light is off, quickly click the switch 4 times to enter the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks to turn on/off the indicator light). Quickly click the switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2250 Lumens powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – Three white LEDs wide flood illumination and ultra-bright output. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. -Magnetic tail stand -Double sides pocket clip   Illuminate your adventures with the SKILHUNT EC200—engineered for brilliance with triple white LEDs and a powerful 18650 battery. Whether you’re hiking rugged trails, camping under the stars, or tackling everyday tasks, the EC200 delivers ultra-bright floodlight, USB-C charging convenience, and rugged durability in a sleek, lightweight design.[/vc_column_text][/vc_column][/vc_row] EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight – [vc_row][vc_column][vc_column_text css=””] The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight The EC200 series are compact and versatile flashlights designed for a variety of uses. The USB-C charging ensures convenience and efficiency, while their durable build makes them perfect for everyday carry, outdoor , camping, and home use. LED: 3 x CREE XP-G4,  Cool White 6500K 3 x  Nichia 519A Neutral White High CRI R9080 4500K 3 x Luminus SFT25R 5000K (new offer) Max output: CREE Cool White ANSI 2250 Lumens, Nichia High CRI 4500K ANSI 1550 Lumens,Luminus 5000K ANSI 1800 Lumens (Plain Lens) Peak Beam Intensity: 7700cd (CW) / 3600cd(519AT 4500K) / 13000cd (SFT25R 5000K ) Beam Distance: 175M(CW) / 120M (519A 45000K) / 228M (SFT25R 5000K) (EC200 SFT25R-5000K: 13000CD 228M  1750Lumens/880/475/160/47/4.5/0.5) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Lens compatible with 10507, 10508, 10509, 10510, 10511 Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: H: Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). From ON <Main Group>, <Turbo Group>, <Low Group> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From <Main Group> 2C: Enter into <Turbo Group>, repeat operation to returns to <Main Group>. 3C: Enter into <Strobe Group>, repeat operation to returns to <Main Group>. 1C&H: Enter into <Low Group>, repeat operation to returns to <Main Group>. From <Strobe Group> 2C: Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the light is off, quickly click the switch 4 times to enter the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks to turn on/off the indicator light). Quickly click the switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A 2250 Lumens powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – Three white LEDs wide flood illumination and ultra-bright output. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. -Magnetic tail stand -Double sides pocket clip   Illuminate your adventures with the SKILHUNT EC200—engineered for brilliance with triple white LEDs and a powerful 18650 battery. Whether you’re hiking rugged trails, camping under the stars, or tackling everyday tasks, the EC200 delivers ultra-bright floodlight, USB-C charging convenience, and rugged durability in a sleek, lightweight design.[/vc_column_text][/vc_column][/vc_row]
Posted in 15% Off, Skilhunt, Sports, Stores

EC200 Powerful EDC 2250 lumens USB-C Rechargeable LED flashlight – [vc_row][vc_column][vc_column_text css=””]...

Buy At Vendors Site

EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight – The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight EC200S is a portable and compact multifunctional light with convenient USB-C charging function. Providing powerful white and color light, suitable for various outdoor activities, running, camping, travel, and daily EDC needs as an ideal companion. LED: 2 x CREE XP-G4 Cool White 6500K + 1 x XPE-2 RED 620-630 nm 2 x  Nichia 519A Neutral White High CRI R9080 5000K + 1 x XPE-2 RED 620-630 nm 2 x Luminus SFT25R 5000K (new offer)+ 1 x XPE-2 RED 620-630 nm Max output: CREE Cool White ANSI 2100 Lumens +  Red 320 Lumens Nichia Neutral White 4500K ANSI 1400 Lumens  +  Red 320 Lumens Luminus 5000K ANSI 1850 Lumens +  Red 320 Lumens Peak Beam Intensity: 6800cd (CW) / 3000cd(519AT 4500K) / 12000cd (SFT25R 5000K ) / 2100cd (Red) Beam Distance: 164M(CW) / 109M (519A 45000K) / 219M (SFT25R 5000K)/ 91M (Red) (EC200S-UV/RED SFT25R-5000K: 12000CD 219M 1800Lumens/900/500/175/51/5/0.8) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). H(0.5S): Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). H(2S): Hold the button for 2 seconds to enter into <Red light Moon>(R5). 1C&H:Activates <Red light Memory>(R2/R3/R4). 2C&H:Activates <Red light Turbo>(R1). From ON White Group <Main Group/Turbo Group/Low Group>, <Red light Memory> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From White Group <Main Group> 2C: Enter into <Turbo Group>. ——–3C: Enter into <Strobe Group>. 1C&H: Enter into <Low Group>. ——–2C&H: Enter into <Red Group>. From <Strobe Group>, <Red light Strobe> 2C: Quickly double clicks switch tranfer S1-S2-S3 / RS1-RS2-RS3, turn off memorized. From <Red Group> 1C&H: R5 <Red light Moon> to <Red light Memory>. 2C: <Red light Memory> to <Red light Turbo> 3C: <Red light Memory / Turbo> to <Red light Strobe>. 2C&H: <Red Group> to <White Group>. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A (white beam 2100+ red beam 320) lumens Dual Channel powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – High brightness white beam plus red beam. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. – Magnetic tail stand – Double sides pocket clip EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight – The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight EC200S is a portable and compact multifunctional light with convenient USB-C charging function. Providing powerful white and color light, suitable for various outdoor activities, running, camping, travel, and daily EDC needs as an ideal companion. LED: 2 x CREE XP-G4 Cool White 6500K + 1 x XPE-2 RED 620-630 nm 2 x  Nichia 519A Neutral White High CRI R9080 5000K + 1 x XPE-2 RED 620-630 nm 2 x Luminus SFT25R 5000K (new offer)+ 1 x XPE-2 RED 620-630 nm Max output: CREE Cool White ANSI 2100 Lumens +  Red 320 Lumens Nichia Neutral White 4500K ANSI 1400 Lumens  +  Red 320 Lumens Luminus 5000K ANSI 1850 Lumens +  Red 320 Lumens Peak Beam Intensity: 6800cd (CW) / 3000cd(519AT 4500K) / 12000cd (SFT25R 5000K ) / 2100cd (Red) Beam Distance: 164M(CW) / 109M (519A 45000K) / 219M (SFT25R 5000K)/ 91M (Red) (EC200S-UV/RED SFT25R-5000K: 12000CD 219M 1800Lumens/900/500/175/51/5/0.8) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). H(0.5S): Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). H(2S): Hold the button for 2 seconds to enter into <Red light Moon>(R5). 1C&H:Activates <Red light Memory>(R2/R3/R4). 2C&H:Activates <Red light Turbo>(R1). From ON White Group <Main Group/Turbo Group/Low Group>, <Red light Memory> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From White Group <Main Group> 2C: Enter into <Turbo Group>. ——–3C: Enter into <Strobe Group>. 1C&H: Enter into <Low Group>. ——–2C&H: Enter into <Red Group>. From <Strobe Group>, <Red light Strobe> 2C: Quickly double clicks switch tranfer S1-S2-S3 / RS1-RS2-RS3, turn off memorized. From <Red Group> 1C&H: R5 <Red light Moon> to <Red light Memory>. 2C: <Red light Memory> to <Red light Turbo> 3C: <Red light Memory / Turbo> to <Red light Strobe>. 2C&H: <Red Group> to <White Group>. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A (white beam 2100+ red beam 320) lumens Dual Channel powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – High brightness white beam plus red beam. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. – Magnetic tail stand – Double sides pocket clip EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight – The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight EC200S is a portable and compact multifunctional light with convenient USB-C charging function. Providing powerful white and color light, suitable for various outdoor activities, running, camping, travel, and daily EDC needs as an ideal companion. LED: 2 x CREE XP-G4 Cool White 6500K + 1 x XPE-2 RED 620-630 nm 2 x  Nichia 519A Neutral White High CRI R9080 5000K + 1 x XPE-2 RED 620-630 nm 2 x Luminus SFT25R 5000K (new offer)+ 1 x XPE-2 RED 620-630 nm Max output: CREE Cool White ANSI 2100 Lumens +  Red 320 Lumens Nichia Neutral White 4500K ANSI 1400 Lumens  +  Red 320 Lumens Luminus 5000K ANSI 1850 Lumens +  Red 320 Lumens Peak Beam Intensity: 6800cd (CW) / 3000cd(519AT 4500K) / 12000cd (SFT25R 5000K ) / 2100cd (Red) Beam Distance: 164M(CW) / 109M (519A 45000K) / 219M (SFT25R 5000K)/ 91M (Red) (EC200S-UV/RED SFT25R-5000K: 12000CD 219M 1800Lumens/900/500/175/51/5/0.8) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). H(0.5S): Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). H(2S): Hold the button for 2 seconds to enter into <Red light Moon>(R5). 1C&H:Activates <Red light Memory>(R2/R3/R4). 2C&H:Activates <Red light Turbo>(R1). From ON White Group <Main Group/Turbo Group/Low Group>, <Red light Memory> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From White Group <Main Group> 2C: Enter into <Turbo Group>. ——–3C: Enter into <Strobe Group>. 1C&H: Enter into <Low Group>. ——–2C&H: Enter into <Red Group>. From <Strobe Group>, <Red light Strobe> 2C: Quickly double clicks switch tranfer S1-S2-S3 / RS1-RS2-RS3, turn off memorized. From <Red Group> 1C&H: R5 <Red light Moon> to <Red light Memory>. 2C: <Red light Memory> to <Red light Turbo> 3C: <Red light Memory / Turbo> to <Red light Strobe>. 2C&H: <Red Group> to <White Group>. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A (white beam 2100+ red beam 320) lumens Dual Channel powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – High brightness white beam plus red beam. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. – Magnetic tail stand – Double sides pocket clip EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight – The 519A 4500K LED has been discontinued, and flashlights with this version are no longer available. It has been replaced by the 519A 5000K LED. EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight EC200S is a portable and compact multifunctional light with convenient USB-C charging function. Providing powerful white and color light, suitable for various outdoor activities, running, camping, travel, and daily EDC needs as an ideal companion. LED: 2 x CREE XP-G4 Cool White 6500K + 1 x XPE-2 RED 620-630 nm 2 x  Nichia 519A Neutral White High CRI R9080 5000K + 1 x XPE-2 RED 620-630 nm 2 x Luminus SFT25R 5000K (new offer)+ 1 x XPE-2 RED 620-630 nm Max output: CREE Cool White ANSI 2100 Lumens +  Red 320 Lumens Nichia Neutral White 4500K ANSI 1400 Lumens  +  Red 320 Lumens Luminus 5000K ANSI 1850 Lumens +  Red 320 Lumens Peak Beam Intensity: 6800cd (CW) / 3000cd(519AT 4500K) / 12000cd (SFT25R 5000K ) / 2100cd (Red) Beam Distance: 164M(CW) / 109M (519A 45000K) / 219M (SFT25R 5000K)/ 91M (Red) (EC200S-UV/RED SFT25R-5000K: 12000CD 219M 1800Lumens/900/500/175/51/5/0.8) Quiescent Current (μA) : 55 Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 Rated range: 2.7-4.2V, (Recommended 18650 battery that max discharge current ≥8A) Dimension: L102.0 mm / 4.02″, Head diameter 25.0mm / 0.98 “. Weight: 48.5g / 1.71 oz (Excluded battery) Accessories: USB-C Charging Cable, Clip, Lanyard, Spare O-rings, User manual. How to use  1. ON/OFF Press the button once to turn the light on and off. When the light is turned off, it will memorized current brightness level or mode. 2. CHANGE BRIGHTNESS LEVEL Note: C = Click (press and release quickly), H = Hold (press and hold) From OFF: 1C: Activates <Main Group> (H-M1-M2). 2C: Activates <Turbo Group> (T1/T2). 3C: Activates <Strobe Group> (S1/S2/S3). 4C: Activates <Lockout> (This stops the light from turning on accidentally). H(0.5S): Hold the button for 0.5 seconds to enter into <Low Group>(L1/L2). H(2S): Hold the button for 2 seconds to enter into <Red light Moon>(R5). 1C&H:Activates <Red light Memory>(R2/R3/R4). 2C&H:Activates <Red light Turbo>(R1). From ON White Group <Main Group/Turbo Group/Low Group>, <Red light Memory> Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. From White Group <Main Group> 2C: Enter into <Turbo Group>. ——–3C: Enter into <Strobe Group>. 1C&H: Enter into <Low Group>. ——–2C&H: Enter into <Red Group>. From <Strobe Group>, <Red light Strobe> 2C: Quickly double clicks switch tranfer S1-S2-S3 / RS1-RS2-RS3, turn off memorized. From <Red Group> 1C&H: R5 <Red light Moon> to <Red light Memory>. 2C: <Red light Memory> to <Red light Turbo> 3C: <Red light Memory / Turbo> to <Red light Strobe>. 2C&H: <Red Group> to <White Group>. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every 2 seconds. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate Low mode. 4. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds,the light fast flash every 2 Minute at same time. When the battery voltage drops below 2.7V, the light will turn off. Charging Connect the USB charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. NOTE: Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging may damage the battery. Power indicator Every time turn on , the side indicator will be light 5 seconds to display the battery power. Constant Blue Indicator: 100%~80% , Blinks Blue Indicator: 80%~50% , Constant Red Indicator: 50%~20% , Blinks Red Indicator: 20%~0. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Features: – A (white beam 2100+ red beam 320) lumens Dual Channel powerful EDC 18650 flashlight. – Universal USB-C charging port. – Customized user interface,Programmable variety of brightness – High brightness white beam plus red beam. – Ultra efficiency circuit design. – TIR Lens, soft and balanced beam. – Two-colors indicator of real-time battery power – Rugged indestructible aluminum body with anti-scratching type III hard anodization – Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. – Side switch button to transferring mode, user-friendly interface to adjust output. – High efficiency driver circuit, no visible flash in any mode. – Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. – Intelligent temperature control technology for flashlight stable and safe use. – Reverse polarity protection, to protect from improper battery installation. – Lock-out function. Avoids light turn on by unexpected. – Location indicator help easy to find the light in dark. – Magnetic tail stand – Double sides pocket clip
Posted in EC Series, Skilhunt, Sports, Stores

EC200S-RED 2100 lumens White and Red beam USB-C Rechargeable Powerful EDC flashlight...

Buy At Vendors Site

Posted in Batteries, Skilhunt, Sports, Stores

BL-109 920mAh 14500 AA Protected Battery – Model: BL-109 Rated Capacity: 920...

Buy At Vendors Site