Flash Sale

M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]         M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: CREE XHP50.3 HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: CREE HI CW : ANSI 2700 Lumens F50S High CRI: 1850 ANSI Lumens Max beam distance: 283 meters (CW) /  224 meters (F50S) Max peak beam intensity: 20000 cd (CW) / 12600 cd (F50S) Quiescent Current :25 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 120mm / 4.172 inch Head diameter 29.5mm / 1.16 inch Weight: 75 g / 2.65 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. F50S version brightness: T1:1850-750-215 Lumen T2:750-215 Lumen H:400-215 Lumen M1:150 Lumen M2:38 Lumen L1:4 Lumen L2:1 Lumen Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Low(L1/L2) mode. When the flashlight was ON (T1/T2, H/M1/M2, L1/L2) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2) Quickly double clicks switch tranfer memory level(H/M1/M2) to Trubo(T1/T2), repeat quickly double clicks switch back to memory level(H/M1/M2). Quickly triple clicks switch   transfer Strobe mode, repeat quickly triple clicks switch back to previous mode. When the flashlight was ON (S1/S2/S3) Quickly double clicks switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second.   Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 3000 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

M300 V2 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text...

Buy At Vendors Site

H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 46g / 1.62oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc.
Posted in Flash Sale, Skilhunt, Sports, Stores

H04 / H04R LED Headlamp – H04 LED headlamp ________________________________________ LED: Cool...

Buy At Vendors Site

H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04 RC / H04R RC LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A , 2x RCR123A Rated Range: 2.7V ~ 6.5V Dimension: Length 99.9mm / 3.93 inch Head diameter 23.5mm / 0.93 inch Body diameter 21.6mm/0.85 inch Weight: 48g / 1.69oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation 1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18650 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ——————————————————— Updated hidden features (May 2023) The low to M/H shortcut, 1 click + 1 hold click. In the new UI , Low mode don’t included this blinking warning. If you don’t need the blinking warning in other higher modes too, you can turn it off (When in L1 / L2 mode, Hold click the side switch, the light will be cycling as L1-L2, cycling 5 times, then flash 3 times, turn off, that blinking warning turn off. Same way to turn this function on.) ________________________________________ Features 1.Super bright & latest  LED, Max 1300 ANSI lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.  
Posted in Flash Sale, Skilhunt, Sports, Stores

H04 RC / H04R RC USB Magnetic Rechargeable LED Headlamp – H04...

Buy At Vendors Site

H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc. H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini LED headlamp ________________________________________ H04/H04R RC Mini LED headlamp ________________________________________ LED: Cool White 5700K-6500K NVSW519AT 5000K R9080 NVSW519AT 4000K R9080 NVSW519AT 3000K R9080 Max output: ANSI 1300 Lumens (Cool White 5700K-6500K ) ANSI 800 Lumens (Nichia 519A 5000K R9080) ANSI 760 Lumens (Nichia 519A 4000K R9080) ANSI 670 Lumens (Nichia 519A 3000K R9080) Max runtime: Few months Max beam distance: 123 meters Max peak beam intensity: 3800cd Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18350 Rated Range: 2.7V ~ 8.4V Dimension: Length 70.9mm / 2.79 inch Head diameter 23.5mm / 0.93 inch Body diameter 23.5mm / 0.93 inch Weight: 45g / 1.59oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Warranty card, Spare O-ring ________________________________________ Operation Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly, the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes. When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with rubber pad. ________________________________________ ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions and notices In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light. When the red indicator flash, please check battery contacts good or not. Warning: Rechargeable function only for one 18350 (3.6/3.7V) rechargeable lithium battery! Please make sure the battery is correctly insert, otherwise it will damage the charging system. ________________________________________ Features 1.Super bright & latest high quality LED, Max 1300 lumens. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 7.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 8.Intelligent temperature control technology for flashlight stable and safe use. 9.Reverse polarity protection, to protect from improper battery installation. 10.When turn off, hold press button to activate lockout function. Avoid light turn on by unexpected. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.
Posted in Flash Sale, Skilhunt, Sports, Stores

H04/H04R RC Mini USB Magnetic Rechargeable LED Headlamp – H04R/H04F RC Mini...

Buy At Vendors Site

M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]The M200 V4 delivers full V4 performance and quality, with some units featuring V3+ laser markings to sustainably use existing inventory, ensuring every other aspect is identical to the V4. M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight LED: TN Cool White CCT 5700K~6500K SFT25R CCT 5700K~6500K Nichia 519A Neutral White High CRI R9080 CCT 5000K SL-F35R High CRI Ra95 R9>80 CCT 4500K-5000K Max output: TN CW : 1900 Lumens SFT25R CW: 1350 Lumens Nichia 519A : 1200 Lumens F35R High CRI: 880 Lumens Max runtime: Few months Quiescent Current :20μA Max beam distance: 339m (SFT25R) / 207m (CW) / 176m (519AT 5000K) 276m(F35R ) Max peak beam intensity: 28800cd (SFT25R) / 10800cd (CW) / 7800cd (519AT 5000K)/19100cd (F35R ) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2 × CR123A Rated Range: 2.7V ~ 6.5V Dimension: L104.5 mm / 4.11″, Head diameter 23.5mm / 0.93 ” Weight: 46 g / 1.62 oz (without battery) Accessories: 1*M200, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 1900 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]The M200 V4 delivers full V4 performance and quality, with some units featuring V3+ laser markings to sustainably use existing inventory, ensuring every other aspect is identical to the V4. M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight LED: TN Cool White CCT 5700K~6500K SFT25R CCT 5700K~6500K Nichia 519A Neutral White High CRI R9080 CCT 5000K SL-F35R High CRI Ra95 R9>80 CCT 4500K-5000K Max output: TN CW : 1900 Lumens SFT25R CW: 1350 Lumens Nichia 519A : 1200 Lumens F35R High CRI: 880 Lumens Max runtime: Few months Quiescent Current :20μA Max beam distance: 339m (SFT25R) / 207m (CW) / 176m (519AT 5000K) 276m(F35R ) Max peak beam intensity: 28800cd (SFT25R) / 10800cd (CW) / 7800cd (519AT 5000K)/19100cd (F35R ) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2 × CR123A Rated Range: 2.7V ~ 6.5V Dimension: L104.5 mm / 4.11″, Head diameter 23.5mm / 0.93 ” Weight: 46 g / 1.62 oz (without battery) Accessories: 1*M200, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 1900 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]The M200 V4 delivers full V4 performance and quality, with some units featuring V3+ laser markings to sustainably use existing inventory, ensuring every other aspect is identical to the V4. M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight LED: TN Cool White CCT 5700K~6500K SFT25R CCT 5700K~6500K Nichia 519A Neutral White High CRI R9080 CCT 5000K SL-F35R High CRI Ra95 R9>80 CCT 4500K-5000K Max output: TN CW : 1900 Lumens SFT25R CW: 1350 Lumens Nichia 519A : 1200 Lumens F35R High CRI: 880 Lumens Max runtime: Few months Quiescent Current :20μA Max beam distance: 339m (SFT25R) / 207m (CW) / 176m (519AT 5000K) 276m(F35R ) Max peak beam intensity: 28800cd (SFT25R) / 10800cd (CW) / 7800cd (519AT 5000K)/19100cd (F35R ) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2 × CR123A Rated Range: 2.7V ~ 6.5V Dimension: L104.5 mm / 4.11″, Head diameter 23.5mm / 0.93 ” Weight: 46 g / 1.62 oz (without battery) Accessories: 1*M200, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 1900 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””]The M200 V4 delivers full V4 performance and quality, with some units featuring V3+ laser markings to sustainably use existing inventory, ensuring every other aspect is identical to the V4. M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight LED: TN Cool White CCT 5700K~6500K SFT25R CCT 5700K~6500K Nichia 519A Neutral White High CRI R9080 CCT 5000K SL-F35R High CRI Ra95 R9>80 CCT 4500K-5000K Max output: TN CW : 1900 Lumens SFT25R CW: 1350 Lumens Nichia 519A : 1200 Lumens F35R High CRI: 880 Lumens Max runtime: Few months Quiescent Current :20μA Max beam distance: 339m (SFT25R) / 207m (CW) / 176m (519AT 5000K) 276m(F35R ) Max peak beam intensity: 28800cd (SFT25R) / 10800cd (CW) / 7800cd (519AT 5000K)/19100cd (F35R ) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2 × CR123A Rated Range: 2.7V ~ 6.5V Dimension: L104.5 mm / 4.11″, Head diameter 23.5mm / 0.93 ” Weight: 46 g / 1.62 oz (without battery) Accessories: 1*M200, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Features 1.Super bright & latest LEDs,  More options for LED. Max 1900 Lumens 2.Removeable multi-directional pocket clip. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat designand new copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 6.Easy to operate multi-function switch 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.When light lockout, location indicator will flash, easy get the light in dark. 12.Magnetic tail, can be used in many special occasions, use as candle light, etc.   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

M200 V4 1900 Lumens 18650 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text...

Buy At Vendors Site

H300 / H300R 2500 Lumens USB magnetic rechargeable LED headlamp – [vc_row][vc_column][vc_column_text css=””] Review photo, H300 / H300R Led headlamp / Flashlight LED: CREE XHP50.3 HI 6500K Nichia 144ART R9050 sm453 4500K SL-F50S R9580 5000K Max output: XHP50.3 HI CW : ANSI 2400 Lumens 144ART R9050 : ANSI  1600 Lumens SL-F50S R9580: ANSI   1650 Lumens Max beam distance: H300R:11500cd(HI CW), 7700cd (F50S) H300: 5400cd (144ART), 7400cd(F50S) Max peak beam intensity: H300R: 214 m (HI CW), 175 m (F50S) H300: 146 m (144ART), 172 m (F50S) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A Rated Range: 2.7V ~ 8.4V Weight: 54g / 1.90 oz (without battery) Dimension: Length 104.7mm(4.12 inch) Head diameter 25.2mm (0.99 inch) /Body diameter 21.6mm(0.85 inch) Weight: 54g / 1.90 oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions : In charging, the red indicator constant light on, when battery almost full charge,indicator change to constant blue light. Features 1.Super bright & latest LED. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.Lock-out function. Avoids light turn on by unexpected. 12.Location indicator help easy to find the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed,change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Reviews: Skilhunt H300 Lightweight. Hands-free. Unstoppable. The SKILHUNT H300R headlamp redefines outdoor illumination with high-lumen output, rechargeable convenience, and a comfortable, durable design. Perfect for hiking, trail running, and work environments—your nights just got brighter.[/vc_column_text][/vc_column][/vc_row] H300 / H300R 2500 Lumens USB magnetic rechargeable LED headlamp – [vc_row][vc_column][vc_column_text css=””] Review photo, H300 / H300R Led headlamp / Flashlight LED: CREE XHP50.3 HI 6500K Nichia 144ART R9050 sm453 4500K SL-F50S R9580 5000K Max output: XHP50.3 HI CW : ANSI 2400 Lumens 144ART R9050 : ANSI  1600 Lumens SL-F50S R9580: ANSI   1650 Lumens Max beam distance: H300R:11500cd(HI CW), 7700cd (F50S) H300: 5400cd (144ART), 7400cd(F50S) Max peak beam intensity: H300R: 214 m (HI CW), 175 m (F50S) H300: 146 m (144ART), 172 m (F50S) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A Rated Range: 2.7V ~ 8.4V Weight: 54g / 1.90 oz (without battery) Dimension: Length 104.7mm(4.12 inch) Head diameter 25.2mm (0.99 inch) /Body diameter 21.6mm(0.85 inch) Weight: 54g / 1.90 oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions : In charging, the red indicator constant light on, when battery almost full charge,indicator change to constant blue light. Features 1.Super bright & latest LED. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.Lock-out function. Avoids light turn on by unexpected. 12.Location indicator help easy to find the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed,change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Reviews: Skilhunt H300 Lightweight. Hands-free. Unstoppable. The SKILHUNT H300R headlamp redefines outdoor illumination with high-lumen output, rechargeable convenience, and a comfortable, durable design. Perfect for hiking, trail running, and work environments—your nights just got brighter.[/vc_column_text][/vc_column][/vc_row] H300 / H300R 2500 Lumens USB magnetic rechargeable LED headlamp – [vc_row][vc_column][vc_column_text css=””] Review photo, H300 / H300R Led headlamp / Flashlight LED: CREE XHP50.3 HI 6500K Nichia 144ART R9050 sm453 4500K SL-F50S R9580 5000K Max output: XHP50.3 HI CW : ANSI 2400 Lumens 144ART R9050 : ANSI  1600 Lumens SL-F50S R9580: ANSI   1650 Lumens Max beam distance: H300R:11500cd(HI CW), 7700cd (F50S) H300: 5400cd (144ART), 7400cd(F50S) Max peak beam intensity: H300R: 214 m (HI CW), 175 m (F50S) H300: 146 m (144ART), 172 m (F50S) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A Rated Range: 2.7V ~ 8.4V Weight: 54g / 1.90 oz (without battery) Dimension: Length 104.7mm(4.12 inch) Head diameter 25.2mm (0.99 inch) /Body diameter 21.6mm(0.85 inch) Weight: 54g / 1.90 oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions : In charging, the red indicator constant light on, when battery almost full charge,indicator change to constant blue light. Features 1.Super bright & latest LED. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.Lock-out function. Avoids light turn on by unexpected. 12.Location indicator help easy to find the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed,change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Reviews: Skilhunt H300 Lightweight. Hands-free. Unstoppable. The SKILHUNT H300R headlamp redefines outdoor illumination with high-lumen output, rechargeable convenience, and a comfortable, durable design. Perfect for hiking, trail running, and work environments—your nights just got brighter.[/vc_column_text][/vc_column][/vc_row] H300 / H300R 2500 Lumens USB magnetic rechargeable LED headlamp – [vc_row][vc_column][vc_column_text css=””] Review photo, H300 / H300R Led headlamp / Flashlight LED: CREE XHP50.3 HI 6500K Nichia 144ART R9050 sm453 4500K SL-F50S R9580 5000K Max output: XHP50.3 HI CW : ANSI 2400 Lumens 144ART R9050 : ANSI  1600 Lumens SL-F50S R9580: ANSI   1650 Lumens Max beam distance: H300R:11500cd(HI CW), 7700cd (F50S) H300: 5400cd (144ART), 7400cd(F50S) Max peak beam intensity: H300R: 214 m (HI CW), 175 m (F50S) H300: 146 m (144ART), 172 m (F50S) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650 , 2x CR123A Rated Range: 2.7V ~ 8.4V Weight: 54g / 1.90 oz (without battery) Dimension: Length 104.7mm(4.12 inch) Head diameter 25.2mm (0.99 inch) /Body diameter 21.6mm(0.85 inch) Weight: 54g / 1.90 oz (without battery) Accessories: Headband, clip, lanyard, magnet replace rubber pad, Operator’s manual, Spare O-ring Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single-click the side switch to turn the light on/off. When the light is turned off, it will memorized the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select <Low Group>(L1/L2). Double-click quickly to switch <Turbo Group> (T1/T2). Triple-click quickly to switch to <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, and the memorized setting will be turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the button and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds, and the light flashes rapidly every 2 minutes. When the battery voltage drops below 2.7V, the light will turn off. Charging instructions : In charging, the red indicator constant light on, when battery almost full charge,indicator change to constant blue light. Features 1.Super bright & latest LED. High-Performance, High-Efficiency and energy conservation. 2.New U.D.O.C Reflector. Increased reflectivity over 10%., Efficiency reflection, perfect beamshot, excellent structure and temperature resistance. 3.Rugged indestructible aluminum body with anti-scratching type III hard anodization 4.Multi-level dissipating heat design and copper starboard, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. 5.Side switch button to transferring mode, user-friendly interface to adjust output. 6.Intelligent dynamic detection of voltage to balance and adjust brightness, safe and efficient use. 7.Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 8.Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 9.Intelligent temperature control technology for flashlight stable and safe use. 10.Reverse polarity protection, to protect from improper battery installation. 11.Lock-out function. Avoids light turn on by unexpected. 12.Location indicator help easy to find the light in dark. 13.Magnetic tail, can be used in many special occasions, use as candle light, etc. Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 10W (5V 2A) ) The red indicator means charging, when the battery charging completed,change to blue indicator. Rechargeable function only for one 18650 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit. Reviews: Skilhunt H300 Lightweight. Hands-free. Unstoppable. The SKILHUNT H300R headlamp redefines outdoor illumination with high-lumen output, rechargeable convenience, and a comfortable, durable design. Perfect for hiking, trail running, and work environments—your nights just got brighter.[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

H300 / H300R 2500 Lumens USB magnetic rechargeable LED headlamp – [vc_row][vc_column][vc_column_text...

Buy At Vendors Site

M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: SFT70.2-HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: SFT70.2-HI CW : ANSI 3000 Lumens F50S High CRI: 2200 ANSI Lumens Max beam distance: 438 meters (CW) /  303 meters (F50S) Max peak beam intensity: 48000 cd (CW) / 23000 cd (F50S) Quiescent Current :36.5 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 123.5mm / 4.86 inch Head diameter 31.5mm / 1.24 inch Weight: 89 g / 3.14 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. (The 21700 battery extender is a limited launch gift, not a standard accessory. Available while supplies last.) Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2-L). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Ultra Low(UL) mode. When the flashlight was ON (T1/T2, H/M1/M2/L, UL) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2/L,UL) Quickly double clicks switch tranfer memory level(H/M1/M2/L/UL) to Trubo(T1/T2), repeat quickly double clicks switch back to previous level. Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous level. When the flashlight was ON (S1/S2/S3) Press and hold the switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. LIGHT SENSOR PROTECTION FUNCTION When the flashlight is in its Turbo (T1/T2), it will automatically downshift if the light is blocked at close range to prevent overheating and potential accidents. When the flashlight off, press and hold the switch for 5 seconds,the light will blink 3 times and then turn off, disabling the light sensor. Press and hold the switch again for 5 seconds to activate the light sensor. (Lens cleanliness and the different objects used to block light can both affect the light sensor.) Features Super bright latest LEDs, max 3000 lumens. Excellent throw + flood beam balance, significantly longer. Ultra lightweight & compact size for superior portability. Rugged aluminum body with Type III hard anodization, scratch-resistant, multiple color options. Built-in magnetic USB charging – fast and convenient. Easy multi-function switch, multiple levels, mode memory. Intelligent temperature control, high-efficiency driver, no flicker. 4-level battery indicator for clear power status. Locator flash in lockout mode – easy to find in the dark. Stainless steel dual-direction removable pocket clip. New detachable magnetic tailcap – hands-free on any iron surface. Two LED options: Far-throw cool white or high-CRI neutral white. IPX8 waterproof and impact resistant. The M300 V4 delivers powerful output, great beam, true EDC size, magnetic charging, and hands-free magnet tail – all in a lightweight, durable package. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: SFT70.2-HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: SFT70.2-HI CW : ANSI 3000 Lumens F50S High CRI: 2200 ANSI Lumens Max beam distance: 438 meters (CW) /  303 meters (F50S) Max peak beam intensity: 48000 cd (CW) / 23000 cd (F50S) Quiescent Current :36.5 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 123.5mm / 4.86 inch Head diameter 31.5mm / 1.24 inch Weight: 89 g / 3.14 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. (The 21700 battery extender is a limited launch gift, not a standard accessory. Available while supplies last.) Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2-L). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Ultra Low(UL) mode. When the flashlight was ON (T1/T2, H/M1/M2/L, UL) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2/L,UL) Quickly double clicks switch tranfer memory level(H/M1/M2/L/UL) to Trubo(T1/T2), repeat quickly double clicks switch back to previous level. Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous level. When the flashlight was ON (S1/S2/S3) Press and hold the switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. LIGHT SENSOR PROTECTION FUNCTION When the flashlight is in its Turbo (T1/T2), it will automatically downshift if the light is blocked at close range to prevent overheating and potential accidents. When the flashlight off, press and hold the switch for 5 seconds,the light will blink 3 times and then turn off, disabling the light sensor. Press and hold the switch again for 5 seconds to activate the light sensor. (Lens cleanliness and the different objects used to block light can both affect the light sensor.) Features Super bright latest LEDs, max 3000 lumens. Excellent throw + flood beam balance, significantly longer. Ultra lightweight & compact size for superior portability. Rugged aluminum body with Type III hard anodization, scratch-resistant, multiple color options. Built-in magnetic USB charging – fast and convenient. Easy multi-function switch, multiple levels, mode memory. Intelligent temperature control, high-efficiency driver, no flicker. 4-level battery indicator for clear power status. Locator flash in lockout mode – easy to find in the dark. Stainless steel dual-direction removable pocket clip. New detachable magnetic tailcap – hands-free on any iron surface. Two LED options: Far-throw cool white or high-CRI neutral white. IPX8 waterproof and impact resistant. The M300 V4 delivers powerful output, great beam, true EDC size, magnetic charging, and hands-free magnet tail – all in a lightweight, durable package. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: SFT70.2-HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: SFT70.2-HI CW : ANSI 3000 Lumens F50S High CRI: 2200 ANSI Lumens Max beam distance: 438 meters (CW) /  303 meters (F50S) Max peak beam intensity: 48000 cd (CW) / 23000 cd (F50S) Quiescent Current :36.5 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 123.5mm / 4.86 inch Head diameter 31.5mm / 1.24 inch Weight: 89 g / 3.14 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. (The 21700 battery extender is a limited launch gift, not a standard accessory. Available while supplies last.) Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2-L). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Ultra Low(UL) mode. When the flashlight was ON (T1/T2, H/M1/M2/L, UL) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2/L,UL) Quickly double clicks switch tranfer memory level(H/M1/M2/L/UL) to Trubo(T1/T2), repeat quickly double clicks switch back to previous level. Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous level. When the flashlight was ON (S1/S2/S3) Press and hold the switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. LIGHT SENSOR PROTECTION FUNCTION When the flashlight is in its Turbo (T1/T2), it will automatically downshift if the light is blocked at close range to prevent overheating and potential accidents. When the flashlight off, press and hold the switch for 5 seconds,the light will blink 3 times and then turn off, disabling the light sensor. Press and hold the switch again for 5 seconds to activate the light sensor. (Lens cleanliness and the different objects used to block light can both affect the light sensor.) Features Super bright latest LEDs, max 3000 lumens. Excellent throw + flood beam balance, significantly longer. Ultra lightweight & compact size for superior portability. Rugged aluminum body with Type III hard anodization, scratch-resistant, multiple color options. Built-in magnetic USB charging – fast and convenient. Easy multi-function switch, multiple levels, mode memory. Intelligent temperature control, high-efficiency driver, no flicker. 4-level battery indicator for clear power status. Locator flash in lockout mode – easy to find in the dark. Stainless steel dual-direction removable pocket clip. New detachable magnetic tailcap – hands-free on any iron surface. Two LED options: Far-throw cool white or high-CRI neutral white. IPX8 waterproof and impact resistant. The M300 V4 delivers powerful output, great beam, true EDC size, magnetic charging, and hands-free magnet tail – all in a lightweight, durable package. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text css=””] M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight LED: SFT70.2-HI Cool White 6500K Customized SL-F50S 5000K Ra95 R9>80 Max output: SFT70.2-HI CW : ANSI 3000 Lumens F50S High CRI: 2200 ANSI Lumens Max beam distance: 438 meters (CW) /  303 meters (F50S) Max peak beam intensity: 48000 cd (CW) / 23000 cd (F50S) Quiescent Current :36.5 μA Waterproof: IPX-8 Battery: 1×21700 Rated Range: 2.7V ~ 4.2V Dimension: Length 123.5mm / 4.86 inch Head diameter 31.5mm / 1.24 inch Weight: 89 g / 3.14 oz (without battery) Accessories: 1*M300, Magnetic Charging Cable, Clip, Lanyard, Spare O-rings,User manual. (The 21700 battery extender is a limited launch gift, not a standard accessory. Available while supplies last.) Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. Battery installation Please make sure that the positive pole of the battery points to the head of the flashlight when you replace the battery. How to use ON/OFF Single click the side switch to turn the light on/off. When the light is turned off, it will memorized current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight was OFF status: Single click switch to memory level (H-M1-M2-L). Quickly double clicks switch to Turbo(T1/T2) mode. Quickly triple-click switch to Strobe(S1/S2/S3) mode. Hold press switch 0.5 second to Ultra Low(UL) mode. When the flashlight was ON (T1/T2, H/M1/M2/L, UL) Press and hold the switch to automatically cycle, the level is selected when the side switch has been released, turn off memorized. When the flashlight was ON (T1/T2, H/M1/M2/L,UL) Quickly double clicks switch tranfer memory level(H/M1/M2/L/UL) to Trubo(T1/T2), repeat quickly double clicks switch back to previous level. Quickly triple clicks switch transfer Strobe mode, repeat quickly triple clicks switch back to previous level. When the flashlight was ON (S1/S2/S3) Press and hold the switch tranfer S1-S2-S3, turn off memorized. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click switch 4 times to access the button lockout mode (location indicator activation at same time,the indicator light flash every second. Double clicks can turn on/off the indicator). Quickly click switch 4 times,the button unlock and activate memory Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off. LIGHT SENSOR PROTECTION FUNCTION When the flashlight is in its Turbo (T1/T2), it will automatically downshift if the light is blocked at close range to prevent overheating and potential accidents. When the flashlight off, press and hold the switch for 5 seconds,the light will blink 3 times and then turn off, disabling the light sensor. Press and hold the switch again for 5 seconds to activate the light sensor. (Lens cleanliness and the different objects used to block light can both affect the light sensor.) Features Super bright latest LEDs, max 3000 lumens. Excellent throw + flood beam balance, significantly longer. Ultra lightweight & compact size for superior portability. Rugged aluminum body with Type III hard anodization, scratch-resistant, multiple color options. Built-in magnetic USB charging – fast and convenient. Easy multi-function switch, multiple levels, mode memory. Intelligent temperature control, high-efficiency driver, no flicker. 4-level battery indicator for clear power status. Locator flash in lockout mode – easy to find in the dark. Stainless steel dual-direction removable pocket clip. New detachable magnetic tailcap – hands-free on any iron surface. Two LED options: Far-throw cool white or high-CRI neutral white. IPX8 waterproof and impact resistant. The M300 V4 delivers powerful output, great beam, true EDC size, magnetic charging, and hands-free magnet tail – all in a lightweight, durable package. Note: Please use high drain 21700 battery that max discharge current ≥10A[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

M300 V4 3000 Lumens 21700 Magnetic USB Rechargeable LED Flashlight – [vc_row][vc_column][vc_column_text...

Buy At Vendors Site

M150 V4+ EDC AA 14500 USB magnetic charging flashlight – [vc_row][vc_column][vc_column_text css=””] M150 V4+ magnetic charging flashlight LED: TN Cool White 5700K~6500K SFT25R-HI 5700K~6500K Neutral White Nichia 519A CRI90 5000K Neutral White Nichia 519A CRI90 4000K Warm White Nichia 519A CRI90 3000K SL-F35R High CRI Ra95 R9>80 4500K-5000K Max Output: CW 1100 Lumens SFT25R HI 850 Lumens 519A 5000K 660 Lumens 519A 4000K 625 Lumens 519A 3000K 575 Lumens F35R 550 Lumens Max runtime: Few months Max beam distance: 14500: 252m (HI) / 148m (CW) / 128m (5000K) / 121m (4000K) / 114m (3000K) / 187m(F35R) Ni-MH: 129m (HI) / 77m (CW) / 66m (5000K) / 63m (4000K) / 60m (3000K) / 100m(F35R) Max peak beam intensity: 14500: 16000cd (HI) / 5500cd (CW) / 4100cd (5000K) / 3700cd (4000K) / 3300cd (3000K) / 8800cd (F35R) Ni-MH: 4000cd (HI) / 1500cd (CW) / 1100cd (5000K) / 1000cd (4000K) / 900cd (3000K)/ 2500cd (F35R) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: Length 84.0mm / 3.30 inch Head diameter 21.0mm / 0.82 inch Weight: 34 g / 1.20 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Magnetic Charging Cable . Battery installation : Insert the battery positive pole toward the light head,otherwise it will not work. How to use ON/OFF Single-click the side switch to turn the light on or off. When the light is turned off, it will memorize the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select the <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select the <Low Group>(L1/L2). Double-click quickly to switch to the <Turbo Group> (T1/T2). Triple-click quickly to switch to the <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when the light is turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch to the <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch to the <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, the selected setting will be memorized when turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the flashlight and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off automatically   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M150 V4+ EDC AA 14500 USB magnetic charging flashlight – [vc_row][vc_column][vc_column_text css=””] M150 V4+ magnetic charging flashlight LED: TN Cool White 5700K~6500K SFT25R-HI 5700K~6500K Neutral White Nichia 519A CRI90 5000K Neutral White Nichia 519A CRI90 4000K Warm White Nichia 519A CRI90 3000K SL-F35R High CRI Ra95 R9>80 4500K-5000K Max Output: CW 1100 Lumens SFT25R HI 850 Lumens 519A 5000K 660 Lumens 519A 4000K 625 Lumens 519A 3000K 575 Lumens F35R 550 Lumens Max runtime: Few months Max beam distance: 14500: 252m (HI) / 148m (CW) / 128m (5000K) / 121m (4000K) / 114m (3000K) / 187m(F35R) Ni-MH: 129m (HI) / 77m (CW) / 66m (5000K) / 63m (4000K) / 60m (3000K) / 100m(F35R) Max peak beam intensity: 14500: 16000cd (HI) / 5500cd (CW) / 4100cd (5000K) / 3700cd (4000K) / 3300cd (3000K) / 8800cd (F35R) Ni-MH: 4000cd (HI) / 1500cd (CW) / 1100cd (5000K) / 1000cd (4000K) / 900cd (3000K)/ 2500cd (F35R) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: Length 84.0mm / 3.30 inch Head diameter 21.0mm / 0.82 inch Weight: 34 g / 1.20 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Magnetic Charging Cable . Battery installation : Insert the battery positive pole toward the light head,otherwise it will not work. How to use ON/OFF Single-click the side switch to turn the light on or off. When the light is turned off, it will memorize the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select the <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select the <Low Group>(L1/L2). Double-click quickly to switch to the <Turbo Group> (T1/T2). Triple-click quickly to switch to the <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when the light is turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch to the <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch to the <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, the selected setting will be memorized when turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the flashlight and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off automatically   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M150 V4+ EDC AA 14500 USB magnetic charging flashlight – [vc_row][vc_column][vc_column_text css=””] M150 V4+ magnetic charging flashlight LED: TN Cool White 5700K~6500K SFT25R-HI 5700K~6500K Neutral White Nichia 519A CRI90 5000K Neutral White Nichia 519A CRI90 4000K Warm White Nichia 519A CRI90 3000K SL-F35R High CRI Ra95 R9>80 4500K-5000K Max Output: CW 1100 Lumens SFT25R HI 850 Lumens 519A 5000K 660 Lumens 519A 4000K 625 Lumens 519A 3000K 575 Lumens F35R 550 Lumens Max runtime: Few months Max beam distance: 14500: 252m (HI) / 148m (CW) / 128m (5000K) / 121m (4000K) / 114m (3000K) / 187m(F35R) Ni-MH: 129m (HI) / 77m (CW) / 66m (5000K) / 63m (4000K) / 60m (3000K) / 100m(F35R) Max peak beam intensity: 14500: 16000cd (HI) / 5500cd (CW) / 4100cd (5000K) / 3700cd (4000K) / 3300cd (3000K) / 8800cd (F35R) Ni-MH: 4000cd (HI) / 1500cd (CW) / 1100cd (5000K) / 1000cd (4000K) / 900cd (3000K)/ 2500cd (F35R) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: Length 84.0mm / 3.30 inch Head diameter 21.0mm / 0.82 inch Weight: 34 g / 1.20 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Magnetic Charging Cable . Battery installation : Insert the battery positive pole toward the light head,otherwise it will not work. How to use ON/OFF Single-click the side switch to turn the light on or off. When the light is turned off, it will memorize the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select the <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select the <Low Group>(L1/L2). Double-click quickly to switch to the <Turbo Group> (T1/T2). Triple-click quickly to switch to the <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when the light is turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch to the <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch to the <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, the selected setting will be memorized when turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the flashlight and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off automatically   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row] M150 V4+ EDC AA 14500 USB magnetic charging flashlight – [vc_row][vc_column][vc_column_text css=””] M150 V4+ magnetic charging flashlight LED: TN Cool White 5700K~6500K SFT25R-HI 5700K~6500K Neutral White Nichia 519A CRI90 5000K Neutral White Nichia 519A CRI90 4000K Warm White Nichia 519A CRI90 3000K SL-F35R High CRI Ra95 R9>80 4500K-5000K Max Output: CW 1100 Lumens SFT25R HI 850 Lumens 519A 5000K 660 Lumens 519A 4000K 625 Lumens 519A 3000K 575 Lumens F35R 550 Lumens Max runtime: Few months Max beam distance: 14500: 252m (HI) / 148m (CW) / 128m (5000K) / 121m (4000K) / 114m (3000K) / 187m(F35R) Ni-MH: 129m (HI) / 77m (CW) / 66m (5000K) / 63m (4000K) / 60m (3000K) / 100m(F35R) Max peak beam intensity: 14500: 16000cd (HI) / 5500cd (CW) / 4100cd (5000K) / 3700cd (4000K) / 3300cd (3000K) / 8800cd (F35R) Ni-MH: 4000cd (HI) / 1500cd (CW) / 1100cd (5000K) / 1000cd (4000K) / 900cd (3000K)/ 2500cd (F35R) Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×14500 , 1x AA Rated Range: 0.8V ~ 4.2V Dimension: Length 84.0mm / 3.30 inch Head diameter 21.0mm / 0.82 inch Weight: 34 g / 1.20 oz (without battery) Accessories: User manual,Spare O-rings,Lanyard,Clip, Magnetic Charging Cable . Battery installation : Insert the battery positive pole toward the light head,otherwise it will not work. How to use ON/OFF Single-click the side switch to turn the light on or off. When the light is turned off, it will memorize the current brightness level or mode. CHANGE BRIGHTNESS LEVEL When the flashlight is OFF : Single-click the switch to select the <Main Group> (H-M1-M2). Press and hold the switch for 0.5 seconds to select the <Low Group>(L1/L2). Double-click quickly to switch to the <Turbo Group> (T1/T2). Triple-click quickly to switch to the <Strobe Group> (S1/S2/S3). When the flashlight is ON in<Main Group>, <Turbo Group>, or <Low Group> Press and hold the switch to cycle through levels. The level will be set when the switch is released, and it will be memorized when the light is turned off. When the flashlight is ON in <Low Group> <Main Group> Quickly double-click to switch to the <Turbo Group>, and quickly double-click again to return to the previous level. Quickly triple-click to switch to the <Strobe Group>, and quickly triple-click again to return to the previous level. Quickly click and hold to toggle between <Low Group> and <Main Group>. When the flashlight is ON in <Strobe Group> Press and hold the switch to cycle through S1-S2-S3, the selected setting will be memorized when turned off. 3.LOCK-OUT FUNCTION & LOCATION INDICATOR When the flashlight is off , quickly click the switch 4 times to enter the lockout mode (the location indicator will activate at the same time, flashing once every second). Double-clicking the switch will turn the indicator on or off. Quickly click the switch 4 times again to unlock the flashlight and activate Low mode. LOW VOLTAGE INDICATOR When the battery voltage drops below 3.0V, the indicator flashes twice every 2 seconds. When the battery voltage drops below 2.7V, the light will turn off automatically   Caution: Please do not point the lighted flashlight to the eyes of people or animals. Please do not cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials. Please do not use the turbo mode continuously when the environmental temperature is high in case the flashlight body is too hot to hold. Please do not put the light with magnetic items such as bank cards and mobile phones. Notice: Before operating this product, please read the enclosed User Manual completely. If the product is left unused or carried and transported, please lock the button or slightly loosen the tail thread to avoid accidentally activating the flashlight. When the product is used in a low-temperature environment, please try and keep it warm. If the temperature is too cold, it may not affect the output and runtime. Charging Connect the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (Recommeded USB power no less than 5W (5V 1A) ) The red indicator means charging, when the battery charging completed, change to blue indicator. Rechargeable function only for one 14500 (3.6V / 3.7V) rechargeable lithium battery! When the battery is incorrectly insert the light,charging will damage the charging circuit.[/vc_column_text][/vc_column][/vc_row]
Posted in Flash Sale, Skilhunt, Sports, Stores

M150 V4+ EDC AA 14500 USB magnetic charging flashlight – [vc_row][vc_column][vc_column_text css=””]...

Buy At Vendors Site