S Series

Ravin R29X – One wicked bullpupA tactical, bullpup-style crossbow, the R29X is fast and compact with integrated silent cocking. This makes it ideal for close quarter hunting with blistering speeds.Its bullpup format provides a longer powerstroke to give the R29X serious power: it’s lightning fast at 450 fps. Ravin HeliCoil technology rotates cams 340º to amp up power and maintain Ravin accuracy without adding bulk.With its integrated Silent Cocking System, the R29X keeps apex hunters quiet. You can slip through and move in tight spaces without sacrificing control or comfort. Ravin R29X – One wicked bullpupA tactical, bullpup-style crossbow, the R29X is fast and compact with integrated silent cocking. This makes it ideal for close quarter hunting with blistering speeds.Its bullpup format provides a longer powerstroke to give the R29X serious power: it’s lightning fast at 450 fps. Ravin HeliCoil technology rotates cams 340º to amp up power and maintain Ravin accuracy without adding bulk.With its integrated Silent Cocking System, the R29X keeps apex hunters quiet. You can slip through and move in tight spaces without sacrificing control or comfort. Ravin R29X – One wicked bullpupA tactical, bullpup-style crossbow, the R29X is fast and compact with integrated silent cocking. This makes it ideal for close quarter hunting with blistering speeds.Its bullpup format provides a longer powerstroke to give the R29X serious power: it’s lightning fast at 450 fps. Ravin HeliCoil technology rotates cams 340º to amp up power and maintain Ravin accuracy without adding bulk.With its integrated Silent Cocking System, the R29X keeps apex hunters quiet. You can slip through and move in tight spaces without sacrificing control or comfort. Ravin R29X – One wicked bullpupA tactical, bullpup-style crossbow, the R29X is fast and compact with integrated silent cocking. This makes it ideal for close quarter hunting with blistering speeds.Its bullpup format provides a longer powerstroke to give the R29X serious power: it’s lightning fast at 450 fps. Ravin HeliCoil technology rotates cams 340º to amp up power and maintain Ravin accuracy without adding bulk.With its integrated Silent Cocking System, the R29X keeps apex hunters quiet. You can slip through and move in tight spaces without sacrificing control or comfort.
Posted in Ravin Crossbows, S Series, Sports and Outdoors, Stores

Ravin R29X – One wicked bullpupA tactical, bullpup-style crossbow, the R29X is...

Buy At Vendors Site

Ravin R18 – A Whole New Kind of Vertical Endeavor.The most compact crossbow Ravin has ever made, the R18 mini vertical limb crossbow is perfect for saddle hunters and for those looking to make quick moves and shots. Measuring just 4.75” wide and 25” long with the removable stock attached, the R18 delivers endless versatility and stopping power, firing at 330 FPS to fill any tag you’re after. Ravin R18 – A Whole New Kind of Vertical Endeavor.The most compact crossbow Ravin has ever made, the R18 mini vertical limb crossbow is perfect for saddle hunters and for those looking to make quick moves and shots. Measuring just 4.75” wide and 25” long with the removable stock attached, the R18 delivers endless versatility and stopping power, firing at 330 FPS to fill any tag you’re after. Ravin R18 – A Whole New Kind of Vertical Endeavor.The most compact crossbow Ravin has ever made, the R18 mini vertical limb crossbow is perfect for saddle hunters and for those looking to make quick moves and shots. Measuring just 4.75” wide and 25” long with the removable stock attached, the R18 delivers endless versatility and stopping power, firing at 330 FPS to fill any tag you’re after. Ravin R18 – A Whole New Kind of Vertical Endeavor.The most compact crossbow Ravin has ever made, the R18 mini vertical limb crossbow is perfect for saddle hunters and for those looking to make quick moves and shots. Measuring just 4.75” wide and 25” long with the removable stock attached, the R18 delivers endless versatility and stopping power, firing at 330 FPS to fill any tag you’re after.
Posted in Ravin Crossbows, S Series, Sports and Outdoors, Stores

Ravin R18 – A Whole New Kind of Vertical Endeavor.The most compact...

Buy At Vendors Site

Ravin R500 – Unparalleled power. Rifle-like accuracy.Our fastest, most powerful compact crossbow, the R500 takes industry-leading Ravin technology to new heights. Big game, long range, there’s nothing an apex hunter can’t achieve with an R500 crossbow at their side.With off-the-charts kinetic energy, the R500 shoots faster and farther without sacrificing any legendary Ravin accuracy. It extends your maximum effective and ethical range to 100 yards.The engineering behind Ravin HexCoil cam systems boosts speeds to over 500 fps. And our groundbreaking VersaDrive Cocking System gives hunters far more control over their shot. With it, you can cock, decock, pause, or resume the process at any time, with no chance of over-cocking – all silent as a shadow. Ravin R500 – Unparalleled power. Rifle-like accuracy.Our fastest, most powerful compact crossbow, the R500 takes industry-leading Ravin technology to new heights. Big game, long range, there’s nothing an apex hunter can’t achieve with an R500 crossbow at their side.With off-the-charts kinetic energy, the R500 shoots faster and farther without sacrificing any legendary Ravin accuracy. It extends your maximum effective and ethical range to 100 yards.The engineering behind Ravin HexCoil cam systems boosts speeds to over 500 fps. And our groundbreaking VersaDrive Cocking System gives hunters far more control over their shot. With it, you can cock, decock, pause, or resume the process at any time, with no chance of over-cocking – all silent as a shadow. Ravin R500 – Unparalleled power. Rifle-like accuracy.Our fastest, most powerful compact crossbow, the R500 takes industry-leading Ravin technology to new heights. Big game, long range, there’s nothing an apex hunter can’t achieve with an R500 crossbow at their side.With off-the-charts kinetic energy, the R500 shoots faster and farther without sacrificing any legendary Ravin accuracy. It extends your maximum effective and ethical range to 100 yards.The engineering behind Ravin HexCoil cam systems boosts speeds to over 500 fps. And our groundbreaking VersaDrive Cocking System gives hunters far more control over their shot. With it, you can cock, decock, pause, or resume the process at any time, with no chance of over-cocking – all silent as a shadow. Ravin R500 – Unparalleled power. Rifle-like accuracy.Our fastest, most powerful compact crossbow, the R500 takes industry-leading Ravin technology to new heights. Big game, long range, there’s nothing an apex hunter can’t achieve with an R500 crossbow at their side.With off-the-charts kinetic energy, the R500 shoots faster and farther without sacrificing any legendary Ravin accuracy. It extends your maximum effective and ethical range to 100 yards.The engineering behind Ravin HexCoil cam systems boosts speeds to over 500 fps. And our groundbreaking VersaDrive Cocking System gives hunters far more control over their shot. With it, you can cock, decock, pause, or resume the process at any time, with no chance of over-cocking – all silent as a shadow.
Posted in Ravin Crossbows, S Series, Sports and Outdoors, Stores

Ravin R500 – Unparalleled power. Rifle-like accuracy.Our fastest, most powerful compact crossbow,...

Buy At Vendors Site

Ravin R26X – Hunt Lighter and LeanerLike all Ravin crossbows, the R26X delivers apex accuracy, supreme power, and unrivaled technology. What makes it distinct is its close-quarters maneuverability and light and lean form factor. As a bullpup-style bow, the R26X is perfect for those who want to maintain equal parts agility and accuracy.At just 26” long and 5.75” wide axle-to-axle cocked, the Ravin R26X is extremely compact. Combined with its silent cocking, your stealth and maneuverability get even more of the spotlight.At 6.5 lbs, the R26X is light and lean enough for saddle hunters and those with smaller frames.The R26X integrates advanced Ravin technology that makes it one of the most accurate 400 fps crossbows on the planet. HeliCoil technology rotates each cam up to 340º while keeping them perfectly balanced. The Versa-Draw Cocking System and Trac-Trigger Firing System combine to ensure straight-line nock travel–a lethally silent combination.R26X models are also available in XK7 camo with 100-Yard Illuminated Speed Lock Scope Ravin R26X – Hunt Lighter and LeanerLike all Ravin crossbows, the R26X delivers apex accuracy, supreme power, and unrivaled technology. What makes it distinct is its close-quarters maneuverability and light and lean form factor. As a bullpup-style bow, the R26X is perfect for those who want to maintain equal parts agility and accuracy.At just 26” long and 5.75” wide axle-to-axle cocked, the Ravin R26X is extremely compact. Combined with its silent cocking, your stealth and maneuverability get even more of the spotlight.At 6.5 lbs, the R26X is light and lean enough for saddle hunters and those with smaller frames.The R26X integrates advanced Ravin technology that makes it one of the most accurate 400 fps crossbows on the planet. HeliCoil technology rotates each cam up to 340º while keeping them perfectly balanced. The Versa-Draw Cocking System and Trac-Trigger Firing System combine to ensure straight-line nock travel–a lethally silent combination.R26X models are also available in XK7 camo with 100-Yard Illuminated Speed Lock Scope Ravin R26X – Hunt Lighter and LeanerLike all Ravin crossbows, the R26X delivers apex accuracy, supreme power, and unrivaled technology. What makes it distinct is its close-quarters maneuverability and light and lean form factor. As a bullpup-style bow, the R26X is perfect for those who want to maintain equal parts agility and accuracy.At just 26” long and 5.75” wide axle-to-axle cocked, the Ravin R26X is extremely compact. Combined with its silent cocking, your stealth and maneuverability get even more of the spotlight.At 6.5 lbs, the R26X is light and lean enough for saddle hunters and those with smaller frames.The R26X integrates advanced Ravin technology that makes it one of the most accurate 400 fps crossbows on the planet. HeliCoil technology rotates each cam up to 340º while keeping them perfectly balanced. The Versa-Draw Cocking System and Trac-Trigger Firing System combine to ensure straight-line nock travel–a lethally silent combination.R26X models are also available in XK7 camo with 100-Yard Illuminated Speed Lock Scope Ravin R26X – Hunt Lighter and LeanerLike all Ravin crossbows, the R26X delivers apex accuracy, supreme power, and unrivaled technology. What makes it distinct is its close-quarters maneuverability and light and lean form factor. As a bullpup-style bow, the R26X is perfect for those who want to maintain equal parts agility and accuracy.At just 26” long and 5.75” wide axle-to-axle cocked, the Ravin R26X is extremely compact. Combined with its silent cocking, your stealth and maneuverability get even more of the spotlight.At 6.5 lbs, the R26X is light and lean enough for saddle hunters and those with smaller frames.The R26X integrates advanced Ravin technology that makes it one of the most accurate 400 fps crossbows on the planet. HeliCoil technology rotates each cam up to 340º while keeping them perfectly balanced. The Versa-Draw Cocking System and Trac-Trigger Firing System combine to ensure straight-line nock travel–a lethally silent combination.R26X models are also available in XK7 camo with 100-Yard Illuminated Speed Lock Scope
Posted in Ravin Crossbows, S Series, Sports and Outdoors, Stores

Ravin R26X – Hunt Lighter and LeanerLike all Ravin crossbows, the R26X...

Buy At Vendors Site

S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment. S2 pro HI / HD USB rechargeable tactical LED flashlight LED: CREE XP-L HD or HI Max output: 1250 Lumens / 1100 Lumens Max runtime: More than 1 month Max beam distance: 306 meters / 371 meters Waterproof: IPX-8 Impact resistant: 1 Meter Battery: 1×18650, 2xCR123A, 2xRCR123A/16340 Rated Range: 2.8V ~ 8.4V USB charge: 5V 1A We recommend to use a 18650 lithium battery with excellent discharge performance. Dimension: Length 143.7mm/5.66inch Head diameter 36.0mm/1.41inch Body diameter 25.4mm/1.0inch Weight: 125g /4.4oz(exclude battery) Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard Operation Note for battery installation: Make sure that insert the battery with the positive end toward the head. Otherwise the torch will not turn on properly. Please do not point the flashlight to the eyes of people or animals, that may affect vision. Flashlight turning on/off, Brightness and Modes switching (Simple tactical group modes and Extended group multi-modes): – Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight. When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode. – Simple tactical group modes (the main light flashes 3 times when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness; Hold press the side button 0.5 seconds into turn off state: Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness; When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. 《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》 – Extended group multi-modes (the main light flashes 1 time when switching to this mode): When the tail switch is locked on: Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1, Cycle; Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness. When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness. Hold press the side button 0.5 seconds into turn off state: Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode. When Full press tail switch turn off: Full Press tail switch again turn on to memory last used setting. Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power. Constant Blue : battery power in more than 80%; Flashing Blue : battery power in more than 50%; Constant Red : battery power in more than 20%; Flashing Red : battery power below 20%, the power is about to run out. Low-voltage indicator: When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible; When the voltage below 2.8V, the flashlight may not work (flashing or shutting down). charging instructions and notices: Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging. In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge. When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not. When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode). Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery! Features 1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation. 2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance. 3 .New glass lens with full-wave band AR coating, Completely loss-less brightness. 4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization 5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity. Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient. 7 . Dual-mode design, simple tactical group modes and extended group multi-modes, to meet the difference use of environment. 8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use. 9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode. 10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access. 11 .Reverse polarity protection, to protect from improper battery installation. 12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage 13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time. 14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time. 15 .Engineered anti-slip knurling for a tightly firm 16. Dual recoil absoring springs, better impact resistance. 17. Tail stand as a candle-light. Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment.
Posted in S Series, Skilhunt, Sports and Outdoors, Stores

S2 pro USB rechargeable tactical flashlight – S2 pro HI / HD...

Buy At Vendors Site